This is an extreme, Stage 3 performance calibration for the Ford Fiesta ST 1.6L EcoBoost, equipped with a Bosch MED17 ECU. This tune is designed exclusively for highly modified vehicles that have been upgraded with a hybrid turbocharger, as well as all other supporting hardware (full exhaust, intercooler, intake, etc.).
This file completely re-engineers the engine's operating parameters to extract the maximum possible power from the upgraded turbo setup, targeting a massive 274hp and 356Nm of torque. Expect brutal acceleration, a massively extended powerband, and a driving experience suitable only for the racetrack. This is the definitive software solution for a full-build Fiesta ST.
This file completely re-engineers the engine's operating parameters to extract the maximum possible power from the upgraded turbo setup, targeting a massive 274hp and 356Nm of torque. Expect brutal acceleration, a massively extended powerband, and a driving experience suitable only for the racetrack. This is the definitive software solution for a full-build Fiesta ST.
Overview Feature list Copyright info Releases (1) Discussion
| Parameter | Value |
|---|---|
| Type (Vehicle): | Passenger car |
| Producer (Vehicle): | Ford |
| Series: | Fiesta |
| Model: | 1.6T |
| Modelyear: | 2014 |
| Type (Engine): | Turbo-Petrol |
| Displacement: | 1.6 L |
| Output: | 182 PS / 133.9 kW |
| Gear: | 6-Speed Manual |
| Use: | Engine |
| Producer (ECU): | Bosch |
| Build (ECU): | MED17.2.2 |
| ECU-Nr. Prod.: | C1BY-12A650-AD |
| ECU-Nr. ECU: | C1BY-12A650-DA |
| Software: | 539039 |
| SW-Version: | C1BY-14C204-DA |
| Checksum: | N/A |
| Cpu: | Bosch MED17 |
| 8-Bit sum: | 5EE6 |
| Versions: | 1 modified version included (Stage 3) + Original for reference |
| Modified by: | Heinz |
| Project type (Project): | Partiell (Nur Kennfeldbereich) |
| Read Hardware: | CMD Flash |
| Project type (Reseller): | Tuningfile |
| Details: | hybrid turbo ( 274hp & 356nm) |
| Project Size: | 2 097 152 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.
