The calibration applies **Stage 1** logic to the 2.0 CDTI A20DTE, targeting an earlier boost rise and steadier pull through mid-range gears. DPF regeneration routines and EGR flow are fully disabled, reducing back-pressure and keeping the intake charge clean. Torque, boost and smoke limiters are rescaled with balanced air-fuel targets so the six-speed gearbox remains within OEM load margins. Cold-start, idle and part-throttle maps are refined to preserve factory fuel economy on cruise while delivering crisper urban response.
Overview Feature list Copyright info Releases (1) Discussion
| Parameter | Value |
|---|---|
| Producer: | Opel |
| Series: | Insignia |
| Model: | 2.0 CDTI |
| Model Year: | 2014 |
| Name Engine: | A20DTE |
| Type (Engine): | Turbo-Diesel |
| Displacement: | 2.0 L |
| Output: | 140 PS / 103 kW |
| Gear: | 6-speed manual |
| Producer (ECU): | Bosch |
| Build (ECU): | EDC17C59 |
| ECU-Nr. Prod: | 45JNVES070 |
| ECU-Nr. ECU: | 0281031379 |
| Software: | 543039 |
| SW-Version: | B12024 |
| Checksum: | N/A |
| CPU: | Unknown |
| Eprom 8-Bit sum: | 0000 |
| Nested Versions: | 1 modified version included (Stage 1) + Original for reference |
| Project Type: | Complete binary file |
| Details: | st1 |
| Project Size: | 2 097 152 bytes |
| Read Hardware: | CMD Flash |
All tuning files were obtained through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.