VW Caddy 2.0 TDI CR DFSx ECU Calibration File – 003742 / SW 1666 (EDC17C64) Stage 1
This set of Stage 1 calibrations enhances the low-output DFSx engine while preserving drivability for the factory 5-speed gearbox. One version unlocks full torque potential, while the second keeps torque limited for transmission longevity. Smoke limiter, fuel maps and boost targets adjusted for better response. Both versions included with stock file.
Overview Feature list Copyright info Releases (1) Discussion
| Parameter | Value |
|---|---|
| Producer: | VW |
| Series: | Caddy |
| Model: | 2.0 TDI CR |
| Model Year: | 2016 |
| Name Engine: | DFSx |
| Type (Engine): | Turbo-Diesel |
| Displacement: | 2.0 |
| Output: | 75.0PS / 55.2KW |
| Gear: | 5M |
| Producer (ECU): | Bosch |
| Build (ECU): | EDC17C64 |
| ECU-Nr. Prod: | 04L906016GJ |
| ECU-Nr. ECU: | 04L907309K |
| Software: | 003742 |
| SW-Version: | 1666 |
| Checksum: | N/A |
| CPU: | Infineon Tricore |
| Eprom 8-Bit sum: | 16EE |
| Nested Versions: | 2 modified versions included (Stage 1 Full torque, Stage 1 Limited torque 5-speed gearbox) + Original for reference |
| Details: | st1 |
| Project Type: | Complete binary file |
| Project Size: | 2 097 152 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.