Tailored for the CFCA 2.0 TDI engine, this calibration set includes Stage 1 for everyday drivability and Stage 2 with full DPF off. Torque curves, air control and injection logic are reworked to provide stronger low-end pull while ensuring clean operation under load. DSG calibration support is retained.
Overview Feature list Copyright info Releases (1) Discussion
| Parameter | Value |
|---|---|
| Producer: | VW |
| Series: | Transporter 5 |
| Model: | 2.0 TDI CR |
| Model Year: | 2010 |
| Name Engine: | CFCA |
| Type (Engine): | Turbo-Diesel |
| Displacement: | 2.0 |
| Output: | 180.0PS / 132.4KW |
| Gear: | DSG |
| Producer (ECU): | Bosch |
| Build (ECU): | EDC17_CP20 |
| ECU-Nr. Prod: | 03L906022JE |
| ECU-Nr. ECU: | 03L907309L |
| Software: | 509954 |
| SW-Version: | 7054 |
| Checksum: | N/A |
| Eprom 8-Bit sum: | CB95 |
| Nested Versions: | 2 modified versions included (Stage 1, Stage 2 NO DPF) + Original for reference |
| Project Type: | Complete binary file |
| Project Size: | 2 097 152 bytes |
| Details: | st1 + st2 NO DPF |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.