BMW Cluster Mileage Tool v1.0 - The New KOMBI Utility
Introducing the BMW Cluster Mileage Tool v1.0, a new, free utility designed for working with the EEPROM data from BMW instrument clusters (KOMBI). This is the first beta release of a promising tool focused on mileage data analysis and modification for both E-series and F-series vehicles.
The software features an attractive and familiar interface, mimicking a modern BMW digital display.
Current Features (v1.0 Beta)
Exciting Roadmap for Future Updates!
This tool is actively being developed, with many powerful features planned for future releases:
Hardware & System Information
Prerequisites:
This software reads EEPROM dump files. To get this file, you must first read the memory from the physical instrument cluster using a compatible hardware programmer (e.g., XPROG-M, UPA-S, VVDI Prog, etc.).
System Requirements:
Disclaimer
This is a beta version of an expert-level tool. Always create a verified backup of your original EEPROM file before making any modifications. Modifying mileage data is illegal in many countries; this function is intended for legitimate cluster replacement and repair only. The user is fully responsible for all actions.
VirusTotal Check: https://www.virustotal.com/gui/file/63d9a9e9e78800487a6b625362aad551fcd94393f6dab2e2fce47caaa7756d0c
Introducing the BMW Cluster Mileage Tool v1.0, a new, free utility designed for working with the EEPROM data from BMW instrument clusters (KOMBI). This is the first beta release of a promising tool focused on mileage data analysis and modification for both E-series and F-series vehicles.
The software features an attractive and familiar interface, mimicking a modern BMW digital display.
Current Features (v1.0 Beta)
- Read Mileage from Eeprom: Open a dump file from an E/F-Series cluster, and the software will instantly show you the mileage stored inside.
- Dual KM / ML Display: The tool conveniently displays the mileage in both Kilometers (KM) and Miles (ML) simultaneously.
- Reset Mileage: A simple "Reset" function allows you to set the mileage value in the EEPROM file to zero. This is essential for installing a used cluster into a new vehicle, as it allows the cluster to adopt the correct mileage from the CAS/FEM module.
- Broad Initial Support: The first version is designed to work with a wide range of instrument clusters from BMW E-Series and F-Series.
Exciting Roadmap for Future Updates!
This tool is actively being developed, with many powerful features planned for future releases:
- Support for G-Series clusters.
- A "Renew" function for F-Series clusters (6WA/6WB), which will allow you to make a used cluster "virgin" for safe installation in another car.
- A "Replace VIN" function for older E-Series clusters (E60/E70/E90).
- A "Replace VIN" function for modern G-Series clusters (6WB, 6U2, 6U3).
Hardware & System Information
Prerequisites:
This software reads EEPROM dump files. To get this file, you must first read the memory from the physical instrument cluster using a compatible hardware programmer (e.g., XPROG-M, UPA-S, VVDI Prog, etc.).
System Requirements:
- Operating System: This software was tested on Windows 10 Enterprise LTSC (2019) and should be compatible with other recent Windows versions.
Disclaimer
This is a beta version of an expert-level tool. Always create a verified backup of your original EEPROM file before making any modifications. Modifying mileage data is illegal in many countries; this function is intended for legitimate cluster replacement and repair only. The user is fully responsible for all actions.
VirusTotal Check: https://www.virustotal.com/gui/file/63d9a9e9e78800487a6b625362aad551fcd94393f6dab2e2fce47caaa7756d0c