Doosan DMS-5 is a service and monitoring application for Doosan and Develon construction equipment. It is used to connect a laptop to the machine controller network to view live parameters, review fault history, and perform guided service checks for excavators and wheel loaders.



Summary Highlights

• Live Monitoring for key machine signals and switch states during operation
• Fault Information with real time DTC view and stored malfunction history review
• Graph view for sensor trends and logging for later comparison and analysis
• Force Operation tests to command supported outputs for functional checks
• Service data tracking like operation hours, fuel consumption, and maintenance counters
• Export and report workflow to save results for job documentation

Supported modules in this build

• Machine Info
• Monitoring
• Graph
• Fault Info
• Force Operation
• Fuel Consumption
• Operation Hours
• Filter and Oil Info
• Daily Operation Info
• Parameter
• Option
• Warning
• Just Connect workflow
• ETC Tool utilities including CAN Bus Monitoring, TMS Terminal Status, Smart Key, VBO Calibration, UVM Manager, SMK Cluster, and log file tools
• Backup and Restore workflow for supported control units

DTC reference tables included
The included CSV library is useful for quick fault code lookup and workshop reporting. Coverage varies by machine family and controller generation.

• Engine fault tables for multiple ECU families including BOSCH, CUMMINS, DELPHI, ISUZU, PERKINS, SCANIA, WEIFU, WOODWARD, and YANMAR
• TCU tables including CP, DZ, HST, and ZF sets
• Steering tables including DX and stage variants
• Vehicle and system tables including inverter, OBC, solar, and VCCS sets
• BMS table set for battery management related codes where applicable

Package contents

• Doosan DMS-5 DTC Excel Tables
• binunlock.com
• DMS-5 3.0.5 (2022.11) Tools.zip
• DMS-5 3.0.5.rar
• Doosan 14 PIN Connector Pin Numbers.jpg
• Doosan 14 PIN Connector Schematic.jpg
• Doosan DMS-5 Diagnostic Harness Layout.jpg
• Doosan DMS-5 DTC Excel Tables.rar
• Doosan DMS-5
• Instruction.txt

Compatibility notes

• Designed for Doosan and Develon excavators and wheel loaders
• Communication and functions depend on controller type, firmware level, and machine configuration
• Some menus and parameters may be hidden or unavailable if the connected machine does not support that feature set
• Requires the correct diagnostic harness and a compatible communication interface for the machine service connector

Basic usage

• Install the application and run it with administrator rights
• Connect the diagnostic interface and the correct harness to the machine service connector
• Select the equipment type and connect, then confirm the communication port settings if prompted
• Read fault information and monitoring data, then save or export a report if needed
• Disconnect safely and power down the interface after the session

Operating systems
Windows 7 SP1, Windows 8.1, Windows 10, Windows 11

Minimum system requirements

• CPU: Dual core 2.0 GHz or better
• RAM: 4 GB minimum, 8 GB recommended
• Storage: 2 GB free plus space for logs and exports
• Display: 1366x768 or higher
• Interfaces: USB for the diagnostic interface and access to a COM port via adapter if required
• Network: Not required for basic diagnostics
• Permissions: Administrator rights recommended for drivers and port access

Disclaimer
Source of Files. All software and resources in this post are collected from public and open sources on the internet. We do not claim authorship or ownership.
File Hosting. This forum does not host files. All links point to third party public cloud storage. We are not responsible for external content.
User Responsibility. Software is provided for educational and evaluation purposes only. You use it at your own risk. Authors of the post and forum administration are not liable for any damage.

---