Fassi crane workshop manual collection

This resource is a multi model PDF library for Fassi knuckle boom cranes.
It brings together factory use and maintenance manuals, hydraulic and electric schematics, capacity plates and safety documentation for a wide range of Fassi loader cranes from light F series units to heavy XP and AXP models such as the F1100AXP.

The manuals follow the standard Fassi structure with an introduction, model classification, technical data, capacity plates, hydraulic and electric diagrams, safety norms, operating instructions, maintenance schedules, lubrication charts and fault finding sections. Individual books are dedicated to specific crane models like F250SE.22, F330B.23, F330D or F360DXP and F1100AXP.28, describing controls, jibs, winches, warnings and residual risks in detail.



Main coverage

• Use and maintenance manuals for many Fassi F series cranes covering classification of the crane model, identification plates and general technical data
• Operating instructions with step by step descriptions of controls, radio remote systems, stabiliser deployment, jib operation and XP or AXP extra power devices where fitted
• Hydraulic and electric schematics with component callouts, valve blocks, sensor locations and harness overviews for troubleshooting hydraulic or electrical faults
• Capacity plates and load diagrams including lifting moment limiting device information, permitted working zones and jib rated capacities
• Safety norms and warning sections explaining operator responsibilities, residual risks, pre use checks and correct positioning of the crane on the carrier
• Maintenance chapters with lubrication points, oil specifications, service intervals and possible faults tables that help technicians track down common problems

Included manuals and documents

The archive is organised by individual Fassi model numbers. Each PDF is a complete manual for that specific crane version.

• Light and medium range cranes – manuals for compact Fassi units such as F3, F4 6, F8, F22A, F38A.21, F40.21, F45A.22, F50A.22, F60A.21, F65A, F70.22, F75, F80 and F95A that are often installed on small and medium trucks
• Standard loading cranes – extensive coverage for F105, F110A.22 or .24, F120AS.22, F140.23, F145, F155A, F160.22 or .23, F170A.23, F190.24 or F190A.22 and F190AC.24 models
• SE and A series cranes – manuals for F230SE.22, F240.24, F240A.22, F240SE.22, F250A.25, F250AS.22, F250SE.22, F270A.23 or .24, F280SE.22 and F300SE models including working pressure supplements
• High capacity F330 family – multi part documentation for F330.23 series, F330A.22 and .24 with supplements, F330B.23 and .24, F330SE.24 including GC versions and F340.23
• XP and heavy duty models – manuals for F330D and F360DXP, F360SE.24, F380A.22 or .24 including F380A420AXP supplements, F390SE.24, F410A.23 or .24, F415A.455AXP.27, F420AXP.22, F480A.24, F530AXP.24, F540A.26, F600.27 series, F600AXP.26, F660XP.27, F700A.800AXP.26, F800.900XP.22, F900A.1000AXP.24 and F1100AXP.28 heavy cranes
• General technical documents – “Fassi crane installation instructions” for correct mounting on the truck chassis, “Fassi stability control” manual for stability systems, KFA or KFAS radio remote control documents, KFGS pump and programming manuals and Vogel lubrication pump KFG1 5 information

Workshop and diagnostic use

• Identify the crane model, serial number and configuration from the identification chapter and plates section before ordering parts or performing repairs
• Consult capacity plates and load diagrams whenever planning lifts, especially when using hydraulic or manual jibs, winches or additional extensions
• Use hydraulic and electric schematics to trace faults in valve blocks, pressure lines, sensors, limit switches and control wiring
• Follow maintenance chapters for scheduled service items such as greasing extension booms, checking oil levels, inspecting hoses, checking XP device indicators and replacing filters
• Apply safety norms and operator responsibilities from the manuals when training new operators or creating internal procedures for crane use

Basic navigation

• Extract the archive and keep the existing folder structure so model specific manuals stay grouped by crane type
• Open the required PDF for your crane model using any standard viewer and use the index or bookmarks to jump to chapters such as technical data, schematics or maintenance
• Print individual pages like hydraulic diagrams, electric schematics, capacity plates or lubrication charts to keep with the vehicle or workshop work order
• For fleets with multiple Fassi cranes, create shortcuts to the most frequently used manuals on your workshop PC so technicians can quickly access the correct document