ISTA+ Standalone updated to v4.56.30 with PSdZData 4.56.32

BMW / MINI diagnostic package has been refreshed to the latest ISTA+ 4.56.30 build with programming data level 4.56.32.
This release keeps everything preconfigured and activated for dealer-level diagnostics, fault finding and ECU programming.

What’s new in 4.56.30 / 4.56.32

• Core ISTA+ application updated to version 4.56.30 for current BMW and MINI model coverage.
• Added support for full PSdZData 4.56.32 programming data for F/G/I-series control units.
• Expert mode is enabled for advanced coding and flashing workflows.
• Programming via ENET cable tested and active; D-CAN interfaces are fully supported.
• All components are prepared for offline use – no additional activation steps required.

Contents of this update

• Rheingold main folder ready to extract directly to C:\Rheingold.
• Two registry files to register ISTA+ and unlock programming / expert functions on Windows.
• PSdZDataFull 4.56.32 package for complete ECU programming – place into C:\Rheingold\PSdZ\data_swi\.
• Installers for Microsoft Visual C++ 2013 and 2015–2022 redistributables plus WebView2 runtime for a clean, stable installation even on fresh systems.

Quick install / update steps

1. Extract the new Rheingold archive directly to C:\Rheingold.
2. Create a desktop shortcut to C:\Rheingold\TesterGUI\bin\Release\ISTAGUI.exe.
3. Run both included registry files (ISTA PLUS and ISTA PLUS 2) to register the application.
4. (Optional but recommended) Copy PSdZDataFull v4.56.32 into C:\Rheingold\PSdZ\data_swi\ to enable full programming coverage.
5. Connect your D-CAN or ENET interface and start ISTA+ from the desktop shortcut – diagnostics, programming and expert mode are ready to use.

Note: This is a version upgrade of the existing resource. All general information, supported vehicles and Windows OS requirements remain as described in the main resource description – only the ISTA+ core and programming data levels have been updated to the latest 4.56.xx line.

BMW ISTA+ 4.55.12 Standalone — what you get
A fast, offline-ready build of BMW’s Integrated Service Technical Application (ISTA+) for modern BMW/MINI/RR platforms. Work through fault finding with step-by-step test plans, read/clear DTCs, view wiring diagrams and service functions, and prep vehicles for repair — even without a live backend.



Highlights in 4.55.12

• 2025 service data refresh with updated repair content and test plan logic.
• Faster start and smoother navigation in offline mode.
• Updated ECU metadata and procedures for recent model years.
• Improved wiring diagram viewer and search.
• Refined measurement workflows and service functions (bleeding, resets, calibrations).

Typical capabilities

• Automatic vehicle identification (VIN/FA/VO).
• Full fault memory scan, DTC details, freeze frames, and guided troubleshooting.
• Service functions: battery registration, adaptations, component calibrations, CBS/maintenance resets, etc.
• Technical documents: repair instructions, tightening torques, wiring diagrams, connector views.
• Measures/test plans with clear pass/fail steps and report export.

Interfaces & coverage

• Interfaces: ICOM Next / ICOM A2, ENET (F/G), K+DCAN (E-series) where supported.
• Platforms: BMW / MINI (and applicable Rolls-Royce) across E/F/G/I series as per data set.
• Programming/coding: follow OEM licensing and power supply requirements; not all functions are available offline.

Included prerequisites (from package view)

• .NET Framework 4.8.1
• Microsoft Visual C++ Redistributables 2013 and 2015–2022
• Microsoft Edge WebView2 runtime
• SHA-256 checksum file and setup executables

System compatibility

• OS: Windows 7 / 8.1 / 10 / 11 (64-bit). Tested on Windows 10 LTSC (2019).
• CPU: 4-core or better
• RAM: 8 GB minimum (16 GB recommended)
• Storage: 60–120 GB free space recommended for databases, logs, and future updates
• Display: 1366×768 or higher

Notes

• Use a stable power supply when performing any control-unit operations.
• Keep network drivers and interface firmware (ICOM, etc.) up to date.
• Verify checksums after download and before install.

---

Disclaimer: This overview is compiled from publicly available information and intended for educational/informational use. Files, if referenced, are user-submitted and may be hosted by third parties; forum staff does not verify ownership or licensing. Use BMW software strictly in accordance with applicable laws and the rights holder’s terms.

The resource has been updated to a newer version of the BMW ISTA+ diagnostic software.

Standalone Version: 4.53.40

This is a complete standalone package, allowing for fresh installation or an update to your existing setup. It provides dealership-level diagnostics, guided fault finding, wiring diagrams, and programming capabilities for all BMW, Mini, and Rolls-Royce vehicles.

What's Included in This Update:

• Full Standalone Package: A comprehensive package of over 26 GB containing all necessary components.
• Multi-Language Support: Includes separate language packs for English (EN) and Russian (RU).
• Programming Data (BLP): The required BLP files for programming and coding vehicle modules are included.
• ICOM Firmware: Contains updated firmware for the ICOM diagnostic interface, essential for maintaining hardware compatibility.
• Required Tools: Comes with necessary components like EDIABAS.

This version provides up-to-date diagnostic and programming capabilities for modern BMW and Mini vehicles.

System Compatibility
This software has been fully tested and is confirmed to be working perfectly on Windows 10 LTSC (2019).

Download: https://mega.nz/file/f1RRAbqQ#QO-80kSS5g_FIMmAJv-YASufNTZ-4jzLe6Eh9CVvDyI
Password Arhive Torrent File: binunlock.com

---