Introduction
Linde Pathfinder LMH+KWS is an OEM service suite for Linde and KION group forklifts. It helps technicians diagnose systems, adjust parameters and document service tasks in a fully configured build with feature activation using valid codes.
Highlights
Package contents
Compatibility notes
Coverage targets Linde forklifts that use LMH and KWS platforms. Functions vary by vehicle series, controller firmware and region. Always confirm available features inside the application.
Basic usage
Operating systems
Minimum system requirements
CPU: Intel i5 class or equivalent • RAM: 8 GB • Storage: 8 GB free • Network: USB or Ethernet for interface connectivity • Admin rights: required.
Disclaimer
* Source of Files. All software and resources in this post are collected from public and open sources on the internet. We do not claim authorship or ownership.
* File Hosting. This forum does not host files. All links point to third party public cloud storage. We are not responsible for external content.
* User Responsibility. Software is provided for educational and evaluation purposes only. You use it at your own risk. Authors of the post and forum administration are not liable for any damage.
Linde Pathfinder LMH+KWS is an OEM service suite for Linde and KION group forklifts. It helps technicians diagnose systems, adjust parameters and document service tasks in a fully configured build with feature activation using valid codes.
Highlights
- Fault code reading and clearing with module identification
- Parameterization for truck functions and component setup
- Basic calibrations and service resets where supported
- Session logs and printable service reports
- ProSecCo utilities for application control and time settings
Package contents
- Linde Application Control ProSecCo 4.6.1.5.zip
- Forklift ProSecCo Utility 2018v1.rar
- Forklift ProSecCo Utility 2018v1.txt
- Pathfinder LMH+ KWS 2019.04.30.zip
- ProSeCco Date Time 2019.rar
- ProSeCco Date Time 2019.txt
- Instruction.txt
Compatibility notes
Coverage targets Linde forklifts that use LMH and KWS platforms. Functions vary by vehicle series, controller firmware and region. Always confirm available features inside the application.
Basic usage
- Download the package and verify the provided checksum
- Read the included Instruction file before connecting to a truck
- Install the suite and required drivers using the preconfigured installer
- Connect a supported interface and select the target controller
- Run diagnostics or parameter adjustments as documented and save reports
Operating systems
- Windows: 7, 8.1, 10, 11 • Architectures: x86 and x64
- macOS: supported via virtualization if required • Chips: Intel and Apple Silicon
Minimum system requirements
CPU: Intel i5 class or equivalent • RAM: 8 GB • Storage: 8 GB free • Network: USB or Ethernet for interface connectivity • Admin rights: required.
Disclaimer
* Source of Files. All software and resources in this post are collected from public and open sources on the internet. We do not claim authorship or ownership.
* File Hosting. This forum does not host files. All links point to third party public cloud storage. We are not responsible for external content.
* User Responsibility. Software is provided for educational and evaluation purposes only. You use it at your own risk. Authors of the post and forum administration are not liable for any damage.
