ProByte J2534 — AirByte (full vеrsiоn) 1.0.0.32

ProByte J2534 (AirByte 1.0.0.32) is a portable SRS/airbag utility that works via J2534 Pass-Thru adapters to read/clear DTCs and, on supported units, perform crash-data reset over CAN.



Highlights

• Works through standard J2534-1 Pass-Thru interface (adapter-agnostic design).
• SRS/airbag focus: ECU identification, DTC read/erase, crash-data reset where permitted by ECU.
• “On-bench” or in-vehicle operation through OBD or breakout—shows connection tips inside [Help].
• Lightweight UI with real-time status, logs and built-in HEX view for advanced users.
• No online account required after device/driver setup.

Tested adapters (user-reported)

• Tactrix Openport 2.0 (J2534)
• Scanmatik-2
• VXDIAG MVCI / mini-VCI
• Chipsoft-J2534

Note. Capability depends on ECU/vehicle and adapter firmware. Some features may be limited on specific interfaces.

Package contents

• ProByte 1.0.0.32 application
• J2534 helper/drivers folder (vendor drivers are still required for your adapter)
• Documentation: brief help inside app ([Help] button)

Quick install & connect

• Unpack the archive to a local folder (e.g., Desktop\ProByte).
• Install the included helper drivers (if present) and the official driver for your J2534 adapter.
• Plug in the USB dongle/device (if applicable) and your J2534 interface.
• Launch AirByte as Administrator.
• Select your adapter in settings, connect to the ECU (vehicle or bench), then choose the function (Read/Erase DTC, Clear Crash, etc.).

Basic usage tips

• Bench mode: follow Help → connection hints; terminate CAN with ~120 Ω when required.
• Vehicle mode: stable 12–14 V supply recommended during service.
• Always read/save ECU ID and logs before any write operation.
• If crash-data reset is unsupported by the ECU, the function will abort safely.

Compatibility notes

• Standard: SAE J2534-1 Pass-Thru (adapter vendor DLL required).
• Vehicle scope: airbag/SRS ECUs that expose diagnostic and crash-data routines via CAN/K-line; support varies by brand/ECU generation.

Operating systems
Windows 7/8/10/11 (x64 recommended).

Minimum system requirements

• CPU: Dual-core 2.0 GHz or better
• RAM: 4 GB+
• Storage: 200 MB free
• Display: 1366×768 or higher
• Hardware: J2534-compatible adapter + stable 12 V power for ECU

Safe use & disclaimer
This utility is provided for legitimate diagnosis and repair by qualified users. Respect regional laws and vehicle safety regulations. Always keep full vеrsiоn backups and verify work on a non-critical bench setup before touching customer vehicles. The publisher of this post hosts no files and provides links/information for educational purposes only. All product names and trademarks belong to their respective owners. Use at your own risk.