Purpose
This package is a preconfigured Windows system image for Xentry Diagnosis OpenShell 09.2025 with XUS, HHT and DAS modules. It is not a VMware or VirtualBox VM. The main file is an Acronis True Image [.tib] backup that you restore to an SSD using a WinPE USB.
Highlights
Package contents
Compatibility notes
Covers Xentry OpenShell for cars with legacy DAS and HHT where applicable. Online functions and special features may require valid accounts and approved VCIs. Communication depends on your interface such as SDconnect C4 or C6 DoIP and stable vehicle power. Some laptops may need Secure Boot disabled to start WinPE. Storage controllers set to RAID can require additional drivers in WinPE.
Basic usage
Operating systems
Minimum system requirements
Quad-core CPU, 16–32 GB RAM recommended, SSD with at least 500 GB free space for the 216 GB image and overhead, reliable USB 3.0 port, wired Ethernet or Wi-Fi, administrator rights on the machine, and a stable battery support unit for any programming tasks.
Disclaimer
Source of Files. All software and resources in this post are collected from public and open sources on the internet. We do not claim authorship or ownership. File Hosting. This forum does not host files. All links point to third party public cloud storage. We are not responsible for external content. User Responsibility. Software is provided for educational and evaluation purposes only. You use it at your own risk. Authors of the post and forum administration are not liable for any damage.
This package is a preconfigured Windows system image for Xentry Diagnosis OpenShell 09.2025 with XUS, HHT and DAS modules. It is not a VMware or VirtualBox VM. The main file is an Acronis True Image [.tib] backup that you restore to an SSD using a WinPE USB.
Highlights
- Fully configured build for Mercedes-Benz passenger platforms with legacy HHT and DAS access
- XUS components prepared for typical SDconnect workflows and DoIP capable hosts
- Offline operation design with clean baseline after restore
- USB boot toolset included to speed up deployment on new hardware
- Function availability varies by vehicle and firmware
Package contents
- WinPE USB\
- rufus-3.14.exe
- WinPE11_10_8_Sergei_Strelec_x86_x64_2025.09.07_English.iso
- Xentry_Cars_Openshell_092025byLinkov.tib
Compatibility notes
Covers Xentry OpenShell for cars with legacy DAS and HHT where applicable. Online functions and special features may require valid accounts and approved VCIs. Communication depends on your interface such as SDconnect C4 or C6 DoIP and stable vehicle power. Some laptops may need Secure Boot disabled to start WinPE. Storage controllers set to RAID can require additional drivers in WinPE.
Basic usage
- Create a bootable USB with the provided WinPE ISO using Rufus or another official tool https://rufus.ie
- Boot the target PC from the USB, start Acronis True Image in WinPE, then select Restore
- Choose Xentry_Cars_Openshell_092025byLinkov.tib and restore the system partition to a blank SSD
- Power off, remove the USB, boot from the restored SSD and complete the first start steps
- Connect your SDconnect or DoIP interface and run a quick test with the vehicle while keeping the system offline unless connectivity is required
Operating systems
- Restored system: Windows x64 environment contained inside the .tib image
- Boot media: WinPE 10 and 11 x86 or x64 from the included Sergei Strelec ISO
- Target hardware: UEFI or Legacy BIOS PCs that support USB boot
Minimum system requirements
Quad-core CPU, 16–32 GB RAM recommended, SSD with at least 500 GB free space for the 216 GB image and overhead, reliable USB 3.0 port, wired Ethernet or Wi-Fi, administrator rights on the machine, and a stable battery support unit for any programming tasks.
Disclaimer
Source of Files. All software and resources in this post are collected from public and open sources on the internet. We do not claim authorship or ownership. File Hosting. This forum does not host files. All links point to third party public cloud storage. We are not responsible for external content. User Responsibility. Software is provided for educational and evaluation purposes only. You use it at your own risk. Authors of the post and forum administration are not liable for any damage.
