- Joined
- 03.05.2025
- Messages
- 1,408
- Reaction score
- 2,670
A new product by Bin is available: BMW X4 G02 xDrive20i ECU File – MG1CS003 / R0C9J8D2BAFDX0 (Vmax off, Sport Display) R0C9J8D - Stage 2 for BMW xDrive20i G02: VMAX limiter disabled, Sport Display activated — based on MG1CS003 platform
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer.
Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website.
Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition.
The seller takes no responsibility for misuse or non-compliant road use.
Read more about this product...
BMW X4 G02 xDrive20i ECU File – MG1CS003 / R0C9J8D2BAFDX0 (Vmax off, Sport Display) R0C9J8D
Description
| Parameter | Value |
|---|---|
| Producer: | BMW |
| Series: | X4 |
| Model: | xDrive20i - 184hp |
| Model Year: | G02 - 2018 -> |
| Name Engine: | N20B200U0 |
| Displacement: | 2.0 |
| Output: | 184.0PS / 135.3kW |
| Gear: | Automatic |
| Producer (ECU): | Bosch |
| Build (ECU): | MG1CS003 |
| Software: | R0C9J8D2BAFDX0 |
| Checksum: | N/A |
| Eprom 8-Bit sum: | FA2F |
| Nested Versions: | 1 modified version included (Stage 2 Vmax Sport Display) + Original for reference |
| Project Type: | Complete binary file |
| Read Hardware: | FEMTO |
| Project Size: | 8 388 608 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer.
Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website.
Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition.
The seller takes no responsibility for misuse or non-compliant road use.
Extended Product Information
- Stage 2 calibration for BMW X4 G02 xDrive20i (N20 2.0L turbo petrol)
- VMAX top speed limiter fully removed
- Sport Display fully enabled for real-time performance feedback
- Torque and throttle response enhanced across the midrange
- Cold-start enrichment and part-load behavior optimised
- All emissions-related logic retained for minimal risk of fault codes
- Compatible with FEMTO MG1 read/write tools
- Original binary file included for full restoration
Read more about this product...
