- Joined
- 03.05.2025
- Messages
- 1,329
- Reaction score
- 1,466
A new product by Bin is available: Saxo 1.6i 16V — IAW48P2.80 9644267980 Marelli — Remap File 16448054 - Citroen Stage 1 & 3 Pack — Prod: 16448054 / ECU: 9642774380 — A full tuning path for the legendary Saxo VTS, from a sporty daily tune to a track-ready build.
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.
Read more about this product...
Saxo 1.6i 16V — IAW48P2.80 9644267980 Marelli — Remap File 16448054
Description
| Parameter | Value |
|---|---|
| Type (Vehicle): | Passenger car |
| Producer (Vehicle): | Citroen |
| Series: | Saxo |
| Model: | 1.6i 16V |
| Modelyear: | 2001 |
| Type (Engine): | Naturally Aspirated Petrol |
| Displacement: | 1.6 L |
| Output: | 120 PS / 88.3 kW |
| Gear: | 5M |
| Use: | Engine |
| Producer (ECU): | Marelli |
| Build (ECU): | IAW48P2.80 |
| ECU-Nr. Prod.: | 16448054 |
| ECU-Nr. ECU: | 9642774380 |
| Software: | 9644267980 |
| Checksum: | All CS ok Marelli |
| Cpu: | Marelli |
| 8-Bit sum: | 8BE1 |
| Versions: | 2 modified versions included (Stage 1, Stage 3) + Original for reference |
| Modified by: | B&C Consulting,Bruno,fsadmin |
| Project type (Project): | Complete binary file |
| Project state: | in development |
| Data areas: | 1: 008000-010BFF |
| Project type (Reseller): | Tuningfile |
| Details: | st1 + st3 |
| Project Size: | 524 288 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.
Extended Product Information
- Stage 1 (Stock Hardware):
- Optimized fuel and ignition maps for a noticeable power increase.
- Sharpened throttle response for a more aggressive feel.
- Rev limiter safely raised for a wider powerband.
- Stage 3 (Requires Camshafts, Full Exhaust, etc.):
- Calibrated for high-lift camshafts and improved intake/exhaust systems.
- Aggressive mapping for maximum power output on a modified NA engine.
- Designed for track and competition use.
Read more about this product...