- Joined
- 03.05.2025
- Messages
- 1,470
- Reaction score
- 4,372
A new product by Bin is available: Skoda Octavia 2.0 TSI ECU File – Simos19.6, SW-Version 0003, ECU 5FF906259 (CAT OFF + OPF OFF) 0003 - Stage 1 tuning for 2.0 TSI DNFB – CAT OFF, OPF OFF, and Start/Stop delete for Skoda Octavia Simos19.6
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer.
Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website.
Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition.
The seller takes no responsibility for misuse or non-compliant road use.
Read more about this product...
Skoda Octavia 2.0 TSI ECU File – Simos19.6, SW-Version 0003, ECU 5FF906259 (CAT OFF + OPF OFF) 0003
Description
| Parameter | Value |
|---|---|
| Producer: | Skoda |
| Series: | Octavia |
| Build: | 2 |
| Model: | 2.0 TSI |
| Model Year: | 2022 |
| Name Engine: | DNFB |
| Type (Engine): | Turbo-Petrol |
| Displacement: | 2.0 |
| Output: | 310.0PS / 228.0kW |
| Gear: | Automatic transmission |
| Producer (ECU): | Siemens/Continental |
| Build (ECU): | Simos19.6 |
| ECU-Nr. Prod: | 5FF906259 |
| ECU-Nr. ECU: | 5FF906259 |
| SW-Version: | 0003 |
| Checksum: | N/A |
| Eprom 8-Bit sum: | 8E92 |
| Nested Versions: | 3 modified versions included (Stage 1, CAT OFF, OPF OFF, Start Stop OFF) + Original for reference |
| Project Type: | Complete Binary File |
| Project Size: | 8 388 608 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer.
Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website.
Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition.
The seller takes no responsibility for misuse or non-compliant road use.
Extended Product Information
- Stage 1 upgrade for Skoda Octavia 2.0 TSI DNFB with Simos19.6
- OPF and CAT systems fully deactivated — no DTCs or limp mode
- Start/Stop system permanently disabled via software patch
- Throttle mapping adjusted for sharper pedal response
- Ignition and load control maps calibrated for better midrange torque
- Emissions diagnostics related to deactivated systems suppressed
- Compatible with most Simos19.6-capable flashing tools
- Original file included for recovery or compliance fallback
Read more about this product...