- Joined
- May 3, 2025
- Messages
- 459
- Reaction score
- 2
A new product by Bin is available: BMW 428i F32 2.0T ECU File – MEVD17.2.9 537945 / 9E8LAHX2 (CAT OFF + Sport Display) 537945 - Stage 2 file for BMW 428i F32 — CAT OFF and Sport Display enabled, includes dual version pack.
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer.
Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website.
Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition.
The seller takes no responsibility for misuse or non-compliant road use.
Read more about this product...
BMW 428i F32 2.0T ECU File – MEVD17.2.9 537945 / 9E8LAHX2 (CAT OFF + Sport Display) 537945
Description
| Parameter | Value |
|---|---|
| Producer: | BMW |
| Series: | F32 |
| Model: | 428i |
| Model Year: | 2013 |
| Name Engine: | 245 |
| Displacement: | 2.0 |
| Output: | 245.0PS / 180.2kW |
| Gear: | Automatic |
| Producer (ECU): | Bosch |
| Build (ECU): | MEVD17.2.9 |
| Software: | 537945 |
| SW-Version: | 9E8LAHX2 |
| Checksum: | N/A |
| Eprom 8-Bit sum: | 66F0 |
| Nested Versions: | 2 modified versions included (Stage 2 CAT OFF, Stage 2 CAT OFF + Sport display) + Original for reference |
| Project Type: | Complete binary file |
| Read Hardware: | Auto Tuner |
| Project Size: | 2 097 152 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer.
Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website.
Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition.
The seller takes no responsibility for misuse or non-compliant road use.
Extended Product Information
- Stage 2 tuning file for BMW F32 428i with 2.0L turbo engine (MEVD17.2.9)
- CAT OFF — rear O2 sensor and catalyst efficiency diagnostics disabled
- Sport Display enabled — real-time torque and power view in iDrive
- Two tuning versions for different driving feel preferences
- Torque model & boost response refined for smoother pull
- Compatible with automatic transmissions
- Original file included for safe flash-back
- Flashed and validated using Auto Tuner interface
- Recommended for motorsport or off-road use only
Read more about this product...