- Joined
- May 3, 2025
- Messages
- 459
- Reaction score
- 2
A new product by Bin is available: BMW X3 G01 xDrive30i ECU File – MG1CS003 / R0C9J8D2BAFNX0 (CAT OFF, Vmax, Sport Display) R0C9J8D - Stage 1+ calibration for BMW X3 xDrive30i — CAT OFF, VMAX removed, Sport Display enabled.
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer.
Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website.
Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition.
The seller takes no responsibility for misuse or non-compliant road use.
Read more about this product...
BMW X3 G01 xDrive30i ECU File – MG1CS003 / R0C9J8D2BAFNX0 (CAT OFF, Vmax, Sport Display) R0C9J8D
Description
| Parameter | Value |
|---|---|
| Producer: | BMW |
| Series: | X3 |
| Model: | xDrive30i - 252hp |
| Model Year: | G01/08 - 2017 -> |
| Name Engine: | B46B20B / B48B20B |
| Displacement: | 2.0 |
| Output: | 252.0PS / 185.3kW |
| Gear: | Automatic |
| Producer (ECU): | Bosch |
| Build (ECU): | MG1CS003 |
| Software: | R0C9J8D2BAFNX0 |
| Checksum: | N/A |
| Eprom 8-Bit sum: | 0C5B |
| Nested Versions: | 1 modified version included (Stage 1+ CAT OFF+ VMAX + sport display) + Original for reference |
| Project Type: | Complete binary file |
| Read Hardware: | Auto Tuner OBD |
| Project Size: | 2 097 152 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer.
Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website.
Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition.
The seller takes no responsibility for misuse or non-compliant road use.
Extended Product Information
- Stage 1+ remap for BMW X3 G01/G08 30i with B46/B48 engine
- VMAX limiter fully removed — no top speed restriction
- Support for CAT delete (downpipe or de-cat pipe setups)
- Sport Display activated for torque and power readouts
- Throttle and torque request logic refined for smoother delivery
- Emissions-related DTCs suppressed for off-road compatibility
- Checksums uncalculated (N/A) — please verify before flashing
- Auto Tuner OBD ready — no patching required
- Delivered with both modified and original binary
Read more about this product...