- Joined
- May 3, 2025
- Messages
- 459
- Reaction score
- 2
A new product by Bin is available: BMW X4 G02 M40i ECU File – MG1CS003 / R0C9J8B2BCGPX1 (CAT OFF, Vmax, Sport Display) J8B2BC - Stage 2 for BMW M40i: CAT delete, VMAX removed & Sport Display activated — based on full MG1CS003 binary.
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer.
Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website.
Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition.
The seller takes no responsibility for misuse or non-compliant road use.
Read more about this product...
BMW X4 G02 M40i ECU File – MG1CS003 / R0C9J8B2BCGPX1 (CAT OFF, Vmax, Sport Display) J8B2BC
Description
| Parameter | Value |
|---|---|
| Producer: | BMW |
| Series: | X4 |
| Model: | M40i - 360hp |
| Model Year: | G02 - 2018 - |
| Name Engine: | B58B30M0 |
| Displacement: | 3.0 |
| Output: | 360.0PS / 264.8kW |
| Gear: | Automatic |
| Producer (ECU): | BOSCH |
| Build (ECU): | MG1CS003 |
| Software: | R0C9J8B2BCGPX1 |
| Checksum: | N/A |
| Eprom 8-Bit sum: | 559B |
| Nested Versions: | 1 modified version included (Stage 2 + VMAX+ sport display + CAT OFF) + Original for reference |
| Project Type: | Complete binary file |
| Read Hardware: | FEMTO |
| Project Size: | 8 388 608 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer.
Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website.
Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition.
The seller takes no responsibility for misuse or non-compliant road use.
Extended Product Information
- Custom Stage 2 file for 3.0L B58 (BMW G02 X4 M40i) on Bosch MG1CS003
- Top speed limiter (VMAX) fully disabled
- Catalytic converter monitoring & logic fully removed (CAT OFF)
- Sport Display enabled for torque/power output readings
- Boost, load & torque curves refined for smooth high-end pull
- Calibrated for OEM drivability with enhanced throttle precision
- Compatible with FEMTO read/write solutions
- Includes original binary for safe recovery
Read more about this product...