- Joined
- May 3, 2025
- Messages
- 459
- Reaction score
- 2
A new product by Bin is available: BMW X5 G05 xDrive40i ECU File – DME8.6T-0-B58-S15A / R4C9F4G5B (CAT delete, Vmax off, Sport Display) C9F4 - Stage 2 calibration for BMW G05 xDrive40i with CAT OFF, VMAX removed and Sport Display enabled
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer.
Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website.
Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition.
The seller takes no responsibility for misuse or non-compliant road use.
Read more about this product...
BMW X5 G05 xDrive40i ECU File – DME8.6T-0-B58-S15A / R4C9F4G5B (CAT delete, Vmax off, Sport Display) C9F4
Description
Parameter | Value |
---|---|
Producer: | BMW |
Series: | X5 SUV |
Build: | G05 |
Model: | xDrive40i - 340hp |
Model Year: | G05 - 2018 - |
Name Engine: | B58B30M1 |
Type (Engine): | Turbo-Petrol |
Displacement: | 2.998 |
Output: | 339.9PS / 250.0kW |
Gear: | Automatic |
Producer (ECU): | Bosch |
Build (ECU): | MG1CS201 |
ECU-Nr. Prod: | R4C9F4G5B |
Software: | DME8.6T-0-B58-S15A |
Checksum: | N/A |
Eprom 8-Bit sum: | 339A |
Nested Versions: | 1 modified version included (Stage 2 + VMAX + CAT OFF + Sport Display) + Original for reference |
Project Type: | Complete binary file |
Read Hardware: | Auto Tuner Bench |
Project Size: | 2 097 152 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer.
Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website.
Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition.
The seller takes no responsibility for misuse or non-compliant road use.
Extended Product Information
- Stage 2 binary for BMW G05 X5 xDrive40i (B58B30M1 engine / MG1CS201 ECU)
- Speed limiter (VMAX) removed for unrestricted top-end capability
- Catalyst efficiency logic disabled — ideal for downpipe-equipped vehicles
- Sport Display fully enabled to reflect true power and torque figures
- Fueling and boost maps refined for sharp midrange response
- Throttle and load targets adapted for a more aggressive curve
- Checksum correction handled internally — flash-ready
- Developed using bench protocol with Auto Tuner for full read/write support
Read more about this product...