Citroën Jumpy 2.0 HDI ECU Calibration – Delphi CDM3.5 / SW T6C1HA05_DELIV_3_G9x_AM6_GSI3_130919...

[Bin]

A new product by Bin is available: Citroën Jumpy 2.0 HDI ECU Calibration – Delphi CDM3.5 / SW T6C1HA05_DELIV_3_G9x_AM6_GSI3_130919 DMS - Stage 1 + Vmax for Citroën Jumpy 2.0 HDI – Delphi CDM3.5 tune with speed limiter removal

Citroën Jumpy 2.0 HDI ECU Calibration – Delphi CDM3.5 / SW T6C1HA05_DELIV_3_G9x_AM6_GSI3_130919 DMS​

Description​

Parameter	Value
Producer:	Citroen
Series:	Jumpy
Model:	2.0 HDI
Model Year:	2012
Type (Engine):	Turbo-Diesel
Displacement:	2.0
Output:	120.0PS / 88.3KW
Gear:	6M
Build (ECU):	CDM3.5
Software:	T6C1HA05_DELIV_3_G9x_AM6_GSI3_POST_DMS_130919
Checksum:	N/A
Eprom 8-Bit sum:	BD25
Nested Versions:	1 modified version included (Stage 1 + Vmax off) + Original for reference
Project Size:	3 145 728 bytes

All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.

Extended Product Information​

• Stage 1 performance remap for Citroën Jumpy 2.0 HDI (2012)
• Developed on Delphi CDM3.5 ECU – SW T6C1HA05_DELIV_3_G9x_AM6_GSI3_POST_DMS_130919
• Maximum speed limiter (Vmax) completely disabled
• Fuel and torque mapping optimised for smoother high-gear pull
• All emissions equipment (DPF, EGR) remains active
• No hardware changes required – runs on stock components
• Checksum status: N/A – verify with flash tool
• Best suited for long-distance driving and unrestricted highways
• Supports tools with Delphi CDM3.5 write capability
• For motorsport/off-road use only – not homologated for road use in some regions

Read more about this product...