- Joined
- May 3, 2025
- Messages
- 847
- Reaction score
- 3
A new product by Bin is available: Clio4 0.9 TCE Valeo V50 Calibration File – SW-Version T2984S 37102984HRMLGT2829ECM - Stage 1 ECU remap for Renault Clio4 0.9 TCE — more boost, smoother powerband, OEM-safe calibration
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Read more about this product...
Clio4 0.9 TCE Valeo V50 Calibration File – SW-Version T2984S 37102984HRMLGT2829ECM
Description
| Parameter | Value |
|---|---|
| Producer: | Renault |
| Series: | Clio4 |
| Model: | 0.9 TCE |
| Model Year: | 2019 |
| Type (Engine): | Turbo-Petrol |
| Displacement: | 0.9 |
| Output: | 90.0PS / 66.2kW |
| Gear: | 5M |
| Producer (ECU): | Valeo |
| Build (ECU): | V50 |
| ECU-Nr. Prod: | 37102984HRMLGT2829ECM |
| SW-Version: | T2984S |
| Checksum: | N/A |
| Eprom 8-Bit sum: | A813 |
| Nested Versions: | 1 modified version included (Stage 1) + Original for reference |
| Project Type: | Complete binary file |
| Details: | st1 |
| Project Size: | 2 228 224 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Extended Product Information
- Stage 1 tuning for the 0.9L TCE turbo engine (Valeo V50 ECU)
- Boost pressure curves raised and torque limiters optimised
- Fuel enrichment and ignition timing adapted for premium-grade fuel
- Part-throttle drivability improved; throttle response sharpened
- Cold start and idle behaviour remain OEM-compliant
- Compatible with factory catalytic and O2 sensors
- Checksum status: N/A
- Supplied as a complete 2 097 152-byte binary
- Dyno-developed with consistent mid-range power gains
- For motorsport/off-road use only
Read more about this product...