- Joined
- May 3, 2025
- Messages
- 847
- Reaction score
- 3
A new product by Bin is available: Ibiza Cupra D 1.9 TDI pd — EDC15P+ 378813 Bosch — ECU Tune 0281012668 - Seat Stage 2 — ECU: 0281012668 / SW: 378813 — A high-performance tune targeting ~205hp & 440Nm, designed for the legendary 1.9 TDI PD engine.
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.
Read more about this product...
Ibiza Cupra D 1.9 TDI pd — EDC15P+ 378813 Bosch — ECU Tune 0281012668
Description
| Parameter | Value |
|---|---|
| Type (Vehicle): | Passenger car |
| Producer (Vehicle): | Seat |
| Series: | Ibiza Cupra D |
| Model: | 1.9 TDI pd |
| Modelyear: | 2008 |
| Type (Engine): | Turbo-Diesel |
| Displacement: | 1.9 L |
| Output: | 160 PS / 117.7 kW |
| Gear: | 6M |
| Use: | Engine |
| Producer (ECU): | Bosch |
| Build (ECU): | EDC15P+ |
| ECU-Nr. Prod.: | 038906019NT |
| ECU-Nr. ECU: | 0281012668 |
| Software: | 378813 |
| Checksum: | N/A |
| Cpu: | Infineon C167CR |
| 8-Bit sum: | 1E06 |
| Versions: | 1 modified version included (Stage 2) + Original for reference |
| Modified by: | iMac 27,Heinz |
| Project type (Project): | Eprom |
| Read Hardware: | Byteshooter Toolbox |
| Project state: | in development |
| Project type (Reseller): | Tuningfile |
| Details: | 205hp & 440nm |
| Project Size: | 524 288 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.
Extended Product Information
- Calibrated for a target output of ~205hp and 440Nm
- Requires an upgraded exhaust, intercooler, and potentially other hardware
- Aggressive injection duration and start-of-injection maps for maximum torque
- Boost pressure targets significantly increased for peak performance
- Smoke limitation maps adjusted for a powerful but clean combustion
- All factory engine safety parameters are retained and adjusted
Read more about this product...