- Joined
- May 3, 2025
- Messages
- 847
- Reaction score
- 3
A new product by Bin is available: Peugeot 207 1.6 HDI EDC16C34 ECU Firmware | Software 389530 | 389530 - Stage 1 remap for Peugeot 207 1.6 HDI — ECU number not supplied, prod number not supplied — earlier boost, EGR-off and smoother 5-speed drivability.
All tuning files were obtained through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.
Read more about this product...
Peugeot 207 1.6 HDI EDC16C34 ECU Firmware | Software 389530 | 389530
Description
| Parameter | Value |
|---|---|
| Producer: | Peugeot |
| Series: | 207 |
| Model: | 1.6 HDI |
| Model Year: | 2008 |
| Type (Engine): | Turbo-Diesel |
| Displacement: | 1.6 L |
| Output: | 90 PS / 66 kW |
| Gear: | 5-speed manual |
| Producer (ECU): | Bosch |
| Build (ECU): | EDC16C34 |
| Software: | 389530 |
| Checksum: | N/A |
| CPU: | Freescale PowerPC |
| Eprom 8-Bit sum: | 7FAE |
| Nested Versions: | 1 modified version included (Stage 1) + Original for reference |
| Project Type: | Complete binary file |
| Details: | st1 |
| Project Size: | 2 099 200 bytes |
| Read Hardware: | EVC BDM |
All tuning files were obtained through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.
Extended Product Information
- EGR valve flow mapped to zero; related DTCs suppressed
- Torque, boost & smoke limiters lifted for a broader mid-range pull
- Throttle-pedal curve sharpened for quicker tip-in without surge
- Vmax limiter raised for relaxed motorway cruising
- DPF regeneration logic left intact (hardware still present)
- CVN patch applied; flashable via OBD or bench with any EDC16-capable tool
- Cold-start fueling and idle control refined for smoother warm-ups
- Calibration retains clutch & gearbox protection strategies
Read more about this product...