- Joined
- May 3, 2025
- Messages
- 847
- Reaction score
- 3
A new product by Bin is available: Peugeot 3008 1.6 HDI Siemens SID807 ECU Firmware | Software 10183277AA / SW PR062C2000000 | 80196 - Stage 1 remap for Peugeot 3008 1.6 HDI with Siemens SID807 ECU — PR062C2000000 / 10183277AA tuning binary
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Read more about this product...
Peugeot 3008 1.6 HDI Siemens SID807 ECU Firmware | Software 10183277AA / SW PR062C2000000 | 80196
Description
| Parameter | Value |
|---|---|
| Producer: | Peugeot |
| Series: | 3008 |
| Model: | 1.6 HDI 16V |
| Model Year: | 2011 |
| Type (Engine): | Turbo-Diesel |
| Displacement: | 1.6 |
| Gear: | 6M |
| Producer (ECU): | Siemens |
| Build (ECU): | SID807 |
| Software: | 10183277AA |
| SW-Version: | PR062C2000000 |
| Checksum: | N/A |
| CPU: | Intel 80196 |
| Eprom 8-Bit sum: | 2FC3 |
| Nested Versions: | 1 modified version included (Stage 1) + Original for reference |
| Project Type: | Complete binary file |
| Project Size: | 2 097 152 bytes |
| Read Hardware: | st1 |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Extended Product Information
- Stage 1 calibration designed for 1.6 HDI Siemens SID807 control unit
- Optimized injection quantity maps and smoother part-throttle delivery
- Torque limiter and driver wish maps adjusted for improved response
- Boost control refined to enhance spool characteristics
- Smoke limiter recalibrated for clean combustion under load
- Safe EGT management strategies retained for long-term reliability
- No DTC suppression or emission system deactivation in this version
- Binary supplied as full readout; compatible with major tools via bench mode
Read more about this product...