- Joined
- May 3, 2025
- Messages
- 847
- Reaction score
- 3
A new product by Bin is available: Renault Clio RS 2.0i 16V ECU Firmware 8201021722 for Sagem 3000 – SW-Version 0018 1021 - Stage 1 tuning for Renault Clio RS 2.0 16V — sharper throttle, more torque, OEM smoothness kept
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Read more about this product...
Renault Clio RS 2.0i 16V ECU Firmware 8201021722 for Sagem 3000 – SW-Version 0018 1021
Description
| Parameter | Value |
|---|---|
| Producer: | Renault |
| Series: | Clio RS |
| Model: | 2.0i 16V |
| Model Year: | 2010 |
| Type (Engine): | Petrol |
| Displacement: | 2.0 |
| Output: | 197PS / 144.9KW |
| Gear: | 6M |
| Producer (ECU): | Sagem |
| Build (ECU): | 3000 |
| ECU-Nr. Prod: | 8201021722 |
| Software: | 8201021722 |
| SW-Version: | 0018 |
| Checksum: | N/A |
| Eprom 8-Bit sum: | 0018 |
| Nested Versions: | 1 modified version included (Stage 1) + Original for reference |
| Project Size: | 65 536 bytes |
| Project Type: | Complete binary file |
| Details: | st1 |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Extended Product Information
- Stage 1 remap for Clio RS 2.0L 16V with naturally aspirated petrol engine
- Optimised ignition and throttle angle maps for quicker throttle response
- Enhanced low and mid-range torque without compromising high-rev power
- OEM-like cold start and idle behaviour preserved
- Fuel and timing adjustments calibrated for 98 RON fuel
- Safe for use with factory catalytic converter and intake
- Checksum correction status: N/A
- Binary supplied in full — no patching required
- Tested on dyno for reliability and response
- For motorsport/off-road use only — check local regulations
Read more about this product...