- Joined
- May 3, 2025
- Messages
- 854
- Reaction score
- 4
A new product by Bin is available: Renault Megane 2 2.0 Turbo Sagem 3000 ECU File – SW-Version 8200588345 588 - Stage 1 tune for Megane 2 2.0 Turbo — better throttle, quicker spool, more response with stock hardware
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Read more about this product...
Renault Megane 2 2.0 Turbo Sagem 3000 ECU File – SW-Version 8200588345 588
Description
| Parameter | Value |
|---|---|
| Producer: | Renault |
| Series: | Megane 2 |
| Model: | 2.0 Turbo |
| Model Year: | 2006 |
| Type (Engine): | Turbo-Petrol |
| Displacement: | 2.0 |
| Output: | 165.0PS / 121.4KW |
| Gear: | 6M |
| Producer (ECU): | Sagem |
| Build (ECU): | 3000 |
| Software: | 8200588345 |
| SW-Version: | 8200588345 |
| Checksum: | N/A |
| Eprom 8-Bit sum: | 6171 |
| Nested Versions: | 1 modified version included (Stage 1) + Original for reference |
| Project Type: | Complete binary file |
| Details: | st1 |
| Project Size: | 65 536 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Extended Product Information
- Stage 1 tuning for Renault Megane 2 2.0 Turbo with Sagem 3000 ECU
- Boost pressure control optimised for faster spool and stronger mid-range pull
- Throttle response sharpened across all drive modes
- Fuel and ignition maps adjusted for 98 RON use
- No changes required to hardware — plug & play on stock setup
- Cold start and idle logic left OEM for reliability
- Checksum status: N/A
- Supplied as full binary (2 097 152 bytes) with original included
- CMD Flash-compatible project
- For motorsport/off-road use only
Read more about this product...