- Joined
- May 3, 2025
- Messages
- 847
- Reaction score
- 3
A new product by Bin is available: Renault Megane 3 1.5 DCI ECU Calibration File – RFXRF73155000000 / 10230474AA (SID307) 1908R2426R - Stage 1 remap for 1.5 DCI Megane III with Siemens SID307 – torque limiter and boost optimization applied
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Read more about this product...
Renault Megane 3 1.5 DCI ECU Calibration File – RFXRF73155000000 / 10230474AA (SID307) 1908R2426R
Description
| Parameter | Value |
|---|---|
| Producer: | Renault |
| Series: | Megane 3 |
| Model: | 1.5 DCI |
| Model Year: | 2012 |
| Type (Engine): | Turbo-Diesel |
| Displacement: | 1.5 |
| Output: | 110.0PS / 80.9KW |
| Gear: | 6M |
| Producer (ECU): | Siemens |
| Build (ECU): | SID307 |
| ECU-Nr. Prod: | 1908R2426R |
| ECU-Nr. ECU: | 10230474AA |
| Software: | RFXRF73155000000 |
| Checksum: | N/A |
| Eprom 8-Bit sum: | BCD9 |
| Nested Versions: | 1 modified version included (Stage 1) + Original for reference |
| Project Type: | Complete binary file |
| Read Hardware: | CMD-Flash |
| Details: | st1 |
| Project Size: | 2 097 152 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Extended Product Information
- Stage 1 ECU calibration for Renault Megane 3 with 1.5 DCI engine and Siemens SID307
- Fuel and boost maps retuned for improved mid-range torque and smoother response
- Torque limiter and rail pressure curves optimised for safer performance gains
- Throttle behavior adjusted for quicker pedal response and improved drivability
- No DTCs or diagnostic issues triggered — suitable for daily use
- Checksum: N/A — verify before flashing
- File format: full binary ready for flashing via CMD-Flash
- Recommended for use on vehicles in good mechanical condition with stock hardware
- Includes original + Stage 1 version for reference
- For motorsport/off-road use only — not legal for road use without emission compliance
Read more about this product...