Transit 2.2 TDCI Siemens SID208 FRQ61C4000000 / SW-DS-PBK21-12A650-BAB — ECU Firmware [Ford]

  • Thread starter Thread starter Bin
  • Start date Start date
  • Tagged users Tagged users None

Transit 2.2 TDCI Siemens SID208 FRQ61C4000000 / SW-DS-PBK21-12A650-BAB — ECU Firmware [Ford]

  • Thread starter Thread starter Bin
  • Start date Start date
  • Tagged users Tagged users None
Transit 2.2 TDCI Siemens SID208 FRQ61C4000000 / SW-DS-PBK21-12A650-BAB — ECU Firmware
Factory mapping on the 2015 Ford Transit 2.2 TDCi leaves generous safety head-room: the driver-wish surface is flattened to protect clutches, turbo duty is capped to keep EGTs low under heavy payloads, and rail-pressure ramps are tuned for smooth fleet drivability. This Stage 1 calibration for the Siemens/Continental SID208 controller re-profiles those areas without touching cold-start or altitude strategies. Pedal input now translates into torque more directly; boost demand is lifted inside the OEM temperature guard-rails; and injection timing sees a modest mid-band advance so the van pulls with less down-shift on inclines. EGR flow is trimmed and diagnostics re-balanced, slowing soot build-up without triggering DTCs, while every DPF, sensor-plausibility and limp-home routine remains active. The result is crisper throttle response, stronger mid-range haul and easier motorway cruising — all with stock hardware and full emissions self-check integrity.

Overview Feature list Copyright info Releases (1) Discussion

Bin

Bin

Thread Owner
Administrator
Joined
May 3, 2025
Messages
827
Reaction score
3
A new product by Bin is available: Transit 2.2 TDCI Siemens SID208 FRQ61C4000000 / SW-DS-PBK21-12A650-BAB — ECU Firmware 14C273 - Stage 1 upgrade — ECU-Nr Prod: CC11-14C273-AAA // BK21-14C204-BNS / ECU-Nr ECU: 10325935AA — punchier low-rpm haul


Transit 2.2 TDCI Siemens SID208 FRQ61C4000000 / SW-DS-PBK21-12A650-BAB — ECU Firmware 14C273​

Description​

ParameterValue
Producer:Ford
Series:Transit
Model:2.2 TDCI
Model Year:2015
Type (Engine):Turbo-Diesel
Displacement:2.2 L
Output:155 PS / 114.0 kW
Gearbox:6-speed manual (6M)
ECU Maker:Siemens/Continental
ECU Build:SID208
ECU-Nr Prod:CC11-14C273-AAA // BK21-14C204-BNS
ECU-Nr ECU:10325935AA
Software:FRQ61C4000000
SW-Version:DS-PBK21-12A650-BAB
Checksum:N/A
Eprom 8-Bit sum:0000
Nested Versions:1 modified version included (Stage 1) + Original for reference
Project Type:Complete binary file
Details:st1
Project Size:2 097 152 bytes
Read Hardware:CMD Flash

All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.

Extended Product Information​

  • Driver-wish & torque limiters rescaled for a more responsive, linear pedal feel
  • Turbo duty and boost ceilings lifted while factory EGT safeguards remain active
  • Rail-pressure ramps refined to stabilise combustion during rapid load changes
  • Mid-band injection timing optimised; idle & cold-start maps stay OEM-smooth
  • EGR flow reduced with diagnostics balanced to prevent DTCs and keep intake cleaner
  • All DPF, sensor-plausibility and limp-home protections fully retained for fleet-grade safety


Read more about this product...
 
You must log in or register to reply here.

Product Information

Seller
Bin
Release date
Last update
Customer rating
0.00 star(s) 0 ratings
Join discussion

Pricing information

Lifetime
€35.00
Purchase

Share this product

Back
Top