- Joined
- May 3, 2025
- Messages
- 814
- Reaction score
- 2
A new product by Bin is available: Vito 3.0 CDI — EDC17CP10 516372 Bosch — ECU Firmware ME6_02 - Mercedes-Benz Stage 1 — SW: 516372 — Unleash the massive V6 torque for ultimate hauling power and surprisingly rapid acceleration in your commercial van.
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.
Read more about this product...
Vito 3.0 CDI — EDC17CP10 516372 Bosch — ECU Firmware ME6_02
Description
| Parameter | Value |
|---|---|
| Producer: | Mercedes-Benz |
| Series: | Vito |
| Model: | 3.0 CDI |
| Model Year: | 2012 |
| Type (Engine): | Turbo-Diesel |
| Displacement: | 3.0 L |
| Output: | 224 PS / 164.8 kW |
| Gearbox: | Automatic transmission |
| ECU Maker: | Bosch |
| ECU Build: | EDC17CP10 |
| ECU-Nr Prod: | CR6NFZ-642-6DN6-639A-Charge4_3ZNW-165kW-EU5_OP-ME6_02 |
| Software: | 516372 |
| Checksum: | N/A |
| Eprom 8-Bit sum: | A368 |
| Nested Versions: | 1 modified version included (Stage 1) + Original for reference |
| Project Type: | Complete binary file |
| Details: | st1 |
| Project Size: | 2 097 152 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.
Extended Product Information
- Driver-wish and torque-limiter maps rescaled for sharper, more linear throttle response
- Turbo duty & boost ceilings lifted while factory exhaust-temperature safeguards stay active
- Rail-pressure ramps refined for steadier combustion during rapid load changes
- Mid-band injection timing optimised; cold-start and idle strategies remain OEM-smooth
- Automatic transmission torque communication adjusted for smooth, decisive shifting
- All catalyst/DPF, sensor-plausibility and limp-home protections fully retained
Read more about this product...