- Joined
- May 3, 2025
- Messages
- 847
- Reaction score
- 3
A new product by Bin is available: VW Amarok 3.0 V6 TDI CR DDXE ECU Calibration File – 030470 / SW 0002 (EDC17CP54) 059907309J - Stage 1 tune for VW Amarok V6 3.0 TDI with better torque response and refined boost control
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Read more about this product...
VW Amarok 3.0 V6 TDI CR DDXE ECU Calibration File – 030470 / SW 0002 (EDC17CP54) 059907309J
Description
| Parameter | Value |
|---|---|
| Producer: | VW |
| Series: | Amarok |
| Model: | 3.0 V6 TDI CR |
| Model Year: | 2018 |
| Name Engine: | DDXE |
| Type (Engine): | Turbo-Diesel |
| Displacement: | 3.0 |
| Output: | 258.0PS / 189.8kW |
| Gear: | Automatic transmission |
| Producer (ECU): | Bosch |
| Build (ECU): | EDC17_CP54 |
| ECU-Nr. Prod: | 2H6907311K |
| ECU-Nr. ECU: | 059907309J |
| Software: | 030470 |
| SW-Version: | 0002 |
| Checksum: | N/A |
| Eprom 8-Bit sum: | 57C6 |
| Nested Versions: | 1 modified version included (Stage 1) + Original for reference |
| Details: | st1 |
| Project Type: | Complete binary file |
| Project Size: | 4 718 592 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Extended Product Information
- Stage 1 ECU calibration for VW Amarok 3.0 V6 TDI DDXE with EDC17CP54
- Torque request and smoke limiter maps adjusted for stronger response
- Boost control and rail pressure re-optimised for smoother load rise
- Cold start and part-throttle behaviour preserved for drivability
- DPF, EGR, and SCR logic left intact — no emissions delete
- Includes original + Stage 1 binaries for rollback if needed
- Compatible with CMD Flash tools (OBD or bench)
- Off-road or dyno application only
Read more about this product...