VW Golf 7 GTI 2.0 TSI CHHA SIMOS18 ECU File | Software SC800F8400000/SW 0007 | [Volkswagen]

  • Thread starter Thread starter Bin
  • Start date Start date
  • Tagged users Tagged users None
  • Thread starter Thread starter Bin
  • Start date Start date
  • Tagged users Tagged users None

Bin

Thread Owner
Administrator
Joined
May 3, 2025
Messages
528
Reaction score
2
A new product by Bin is available: VW Golf 7 GTI 2.0 TSI CHHA SIMOS18 ECU File | Software SC800F8400000/SW 0007 | 5G0906259 - Stage 2 with Pop&Bangs and Start/Stop delete for Golf 7 GTI CHHA 2.0 TSI – ECU SIMOS18 5G0906259, tuned for aggressive response and enhanced feedback


VW Golf 7 GTI 2.0 TSI CHHA SIMOS18 ECU File | Software SC800F8400000/SW 0007 | 5G0906259

Description​

ParameterValue
Producer:VW
Series:Golf7 GTI
Model:2.0 TSI
Model Year:2014
Name Engine:CHHA
Type (Engine):Turbo-Petrol
Displacement:2.0
Output:230.0PS / 169.2KW
Gear:6M
Producer (ECU):Siemens/Continental
Build (ECU):SIMOS18
ECU-Nr. Prod:5G0906259
Software:SC800F8400000
SW-Version:0007
Checksum:N/A
Eprom 8-Bit sum:35D2
Nested Versions:1 modified version included (Stage 2 + P&Bs + NO Start&Stop) + Original for reference
Project Type:Complete binary file
Project Size:8 388 608 bytes
Details:st2

All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.

Extended Product Information​

  • Stage 2 remap for Golf 7 GTI CHHA 2.0 TSI with 6-speed manual
  • Pop&Bangs enabled in Sport/Sport+ modes only
  • Start/Stop system fully disabled – no auto-shut at idle
  • Boost and load targets raised for enhanced top-end output
  • Ignition timing and AFR adjusted for aggressive throttle control
  • Launch control logic revised for quicker off-the-line pull
  • Torque intervention maps recalibrated for stronger pull
  • SIMOS18 ECU – Software SC800F8400000 / SW 0007
  • Read/write via CMD Flash tools
  • Delivered as full binary with original and modified files


Read more about this product...
 
Back
Top