VW Transporter T5 2.0 TDI CFCA EDC17CP20 ECU File | Software 509954/SW 7054 | [Volkswagen]

  • Thread starter Thread starter Bin
  • Start date Start date
  • Tagged users Tagged users None
  • Thread starter Thread starter Bin
  • Start date Start date
  • Tagged users Tagged users None

Bin

Thread Owner
Administrator
Joined
May 3, 2025
Messages
528
Reaction score
2
A new product by Bin is available: VW Transporter T5 2.0 TDI CFCA EDC17CP20 ECU File | Software 509954/SW 7054 | 03L907309L - Stage 1 & Stage 2 NO DPF for VW Transporter T5 2.0 TDI CFCA – ECU 03L907309L / Prod 03L906022JE with EDC17CP20, refined torque and DPF delete logic


VW Transporter T5 2.0 TDI CFCA EDC17CP20 ECU File | Software 509954/SW 7054 | 03L907309L

Description​

ParameterValue
Producer:VW
Series:Transporter 5
Model:2.0 TDI CR
Model Year:2010
Name Engine:CFCA
Type (Engine):Turbo-Diesel
Displacement:2.0
Output:180.0PS / 132.4KW
Gear:DSG
Producer (ECU):Bosch
Build (ECU):EDC17_CP20
ECU-Nr. Prod:03L906022JE
ECU-Nr. ECU:03L907309L
Software:509954
SW-Version:7054
Checksum:N/A
Eprom 8-Bit sum:CB95
Nested Versions:2 modified versions included (Stage 1, Stage 2 NO DPF) + Original for reference
Project Type:Complete binary file
Project Size:2 097 152 bytes
Details:st1 + st2 NO DPF

All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.

Extended Product Information​

  • Includes Stage 1 and Stage 2 maps for VW Transporter T5 CFCA 2.0 TDI
  • DPF system fully disabled in Stage 2 — regeneration & monitors off
  • Torque limiter, driver request and boost maps revised for both files
  • Injection timing refined for smooth diesel performance
  • Supports DSG calibration logic – stock gearbox behaviour preserved
  • Air mass and turbo flow control improved for stronger midrange torque
  • Siemens EDC17CP20 ECU – Software 509954 / SW 7054
  • Compatible with CMD Flash and other EDC17-capable tools
  • Full binary set with Original + two modified versions
  • Emissions-related components untouched in Stage 1 file


Read more about this product...
 
Back
Top