VW Transporter T6 2.0 TDI CXFA CXHA DCM6.2 ECU File | Software B0A4XTAKBHS0M_X625/SW 3802 |...

  • Thread starter Thread starter Bin
  • Start date Start date
  • Tagged users Tagged users None
  • Thread starter Thread starter Bin
  • Start date Start date
  • Tagged users Tagged users None

Bin

Thread Owner
Administrator
Joined
May 3, 2025
Messages
528
Reaction score
2
A new product by Bin is available: VW Transporter T6 2.0 TDI CXFA CXHA DCM6.2 ECU File | Software B0A4XTAKBHS0M_X625/SW 3802 | 04L906056KL - Stage 1 remap for VW Transporter T6 2.0 TDI CXFA/CXHA – ECU DCM6.2, SW 3802 / Software B0A4XTAKBHS0M_X625, developed for stronger midrange and reduced lag


VW Transporter T6 2.0 TDI CXFA CXHA DCM6.2 ECU File | Software B0A4XTAKBHS0M_X625/SW 3802 | 04L906056KL

Description​

ParameterValue
Producer:VW
Series:Transporter6
Model:2.0 TDI CR
Model Year:2017
Name Engine:CXFA CXHA
Type (Engine):Turbo-Diesel
Displacement:2.0
Output:150.0PS / 110.3kW
Gear:6M
Producer (ECU):Delphi
Build (ECU):DCM6.2
ECU-Nr. Prod:04L906056KL
Software:B0A4XTAKBHS0M_X625
SW-Version:3802
Checksum:N/A
Eprom 8-Bit sum:5103
Nested Versions:1 modified version included (Stage 1) + Original for reference
Project Type:Complete binary file
Project Size:4 194 304 bytes
Details:st1

All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.

Extended Product Information​

  • Stage 1 performance remap for VW Transporter T6 2.0 TDI CXFA / CXHA
  • Optimised turbo spool for better low-end pickup and towing response
  • Torque limiter and injection timing refinements for smoother gear transitions
  • Air mass and load requests calibrated for better part-throttle efficiency
  • Fuel rail pressure adjusted for stability under load
  • Developed for Delphi DCM6.2 ECU – Software B0A4XTAKBHS0M_X625
  • Supports SW 3802 – CMD Flash compatible
  • Delivered as a complete binary with original and Stage 1 version


Read more about this product...
 
Back
Top