- Joined
- May 3, 2025
- Messages
- 813
- Reaction score
- 2
A new product by Bin is available: Z4 E89 35i — MSD8x 0044CC0ILA0SIGR3S Siemens — Calibration File 0044 - BMW Stage 1 & 2 Tuning Pack — SW: 0044CC0ILA0SIGR3S — A complete performance package for your Z4, from a powerful daily tune to an aggressive track remap.
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.
Read more about this product...
Z4 E89 35i — MSD8x 0044CC0ILA0SIGR3S Siemens — Calibration File 0044
Description
| Parameter | Value |
|---|---|
| Type (Vehicle): | Passenger car |
| Producer (Vehicle): | BMW |
| Series: | Z4 |
| Build (Vehicle): | E89 |
| Model: | 35i |
| Modelyear: | 2009 |
| Type (Engine): | Turbo-Petrol |
| Displacement: | 3.0 L |
| Output: | 306 PS / 225.1 kW |
| Gear: | DKG |
| Use: | Engine |
| Producer (ECU): | Siemens |
| Build (ECU): | MSD8x |
| Software: | 0044CC0ILA0SIGR3S |
| Checksum: | N/A |
| CPU: | Infineon Tricore |
| 8-Bit sum: | 5D66 |
| Versions: | 2 modified versions included (Stage 1, Stage 2) + Original for reference |
| Modified by: | B&C Consulting,Bruno |
| Project type (Project): | Binary data |
| Project state: | in development |
| Data areas: | 1: 040000-07FFFF |
| Project type (Reseller): | Tuningfile |
| Details: | st1 + st2 |
| Project Size: | 2 097 152 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.
Extended Product Information
- Stage 1 (Stock Hardware):
- Significant horsepower and torque gains for a much faster roadster.
- Sharpened throttle response and reduced turbo lag.
- Stage 2 (Requires Downpipes & Intercooler):
- Maximum performance from the stock twin-turbo setup.
- Aggressive boost, fuel, and timing maps for track performance.
- Catalyst monitoring disabled in software for decat pipes (off-road use).
- DKG transmission torque communication optimized for faster shifts and higher power.
Read more about this product...