MAHINDRA PICK-UP S4 2023 MILEAGE CORRECTION

Post #1

D-MASS

Bolt-On Member

Mozambique
Joined
28.04.2026
Messages
29
Reactions
2
Location
Mozambique
Good morning family, I need you help to do mileage correction in mahindra S4 2023 can someone help me there. I have Thinktool master 2, xtool x100 pro2, AUTEL im508s + XP400 pro.
 
Ratings and Reviews
Total ratings: 0

Post #2

Which software exactly are you after? The thread is about odometer correction on the Mahindra S4 2023 — if you're looking for a specific tool's calibration file or a dump, you'll need to say what hardware you're using and what you're trying to do.
 

Post #3

Clearing DTCs is a different job from mileage correction, so let's separate them.

For Mahindra (S4 or others) and Tata models, basic OBD2 fault clearing works on most modules with any generic scanner, but deeper module-level resets — ABS, airbag, body, proprietary powertrain codes — often need brand-specific or enhanced software.

Before pointing you at anything useful, I need a few details:

  • Which vehicle exactly? Mahindra model/year and Tata model/year separately — they're completely different platforms.
  • Which module is throwing the codes? Engine, ABS, airbag, instrument cluster, etc.
  • What tool do you have? The thread mentions Thinktool Master 2, Xtool X100 Pro2, Autel IM508S — are any of those yours, or do you have something different?
  • What are the actual DTCs? Post the code numbers — some are permanent/non-erasable without a hardware fix, and no software will clear those until the fault is resolved.

With those details I can tell you whether your existing tool covers it or whether you need something else.
 

Post #4

Bro, I already asked the key questions in my last post and still need answers before anyone here can help you.

  • Which Tata model and year?
  • Which module? Engine, ABS, airbag — different modules need different approaches.
  • What are the actual DTC codes? Some codes cannot be erased without fixing the fault first — no software changes that.
  • What tool do you have?

There's no single "Tata DTC remove software" that covers everything. Post those details and someone can point you at the right tool or method.
 

Post #5

Good, ECM narrows it down. For Tata ECM fault clearing you're generally looking at DiagBox, Tata's own dealer-level software, or tools with enhanced Tata coverage like Autel or Launch with the right database.

Still need two things to point you at the right path:

  • Tata model and year — Nexon, Harrier, Safari, Punch, older Indica/Indigo? ECM protocol varies a lot between platforms.
  • The actual DTC codes — if it's a live fault the code will come back the moment you clear it without fixing the root cause. Some are also permanent until certain drive cycle conditions are met.

What tool do you have available right now?
 

Post #6

P0420 is catalyst efficiency below threshold — clearing it will work temporarily but it comes straight back after a drive cycle if the underlying cause isn't fixed first. On Tata platforms this one is usually triggered by a degraded cat, a lazy downstream O2 sensor, or an exhaust leak upstream of that sensor. Worth diagnosing before you spend time on the erase.

Still need the rest of the picture to help properly:

  • Tata model and year — still haven't got this
  • The other codes ("AND .....") — post them all, the full set matters
  • What tool you have available

Also — is the Check Engine light staying on, or did it come on and go off on its own? And has anyone replaced the cat or O2 sensors on this vehicle recently?
 

Post #7

Alright, Indica — getting closer. That's a diesel then, and EGR off + DPF off + P0420 all in one job makes sense as a package.

To point you at the right file or service you need to give me the exact ECU details:

  • Indica model and year — Indica V2, Indica Vista, or eCS? And the year, because the ECU changed across BS3/BS4 generations.
  • Engine — 1.4 TDI (Fiat-sourced) or 1.3 Multijet? Both are common but have different ECUs.
  • ECU brand and ID — open the ECU or check with your tool. On most Indica diesels it's Bosch (EDC16 or EDC17 family) or Delphi DCM3.x. The hardware and software number is printed on the ECU label.
  • What tool do you have — KESS, KTAG, MPPS, Autotuner, or something else? And are you reading OBD or bench?

EGR off and DPF off on these is straightforward once the ECU is identified — it's a map edit job, not a wiring job. But the correct file depends entirely on the HW/SW numbers, so post those and we can go from there.
 

Post #8

Can't send anything yet — I still don't have the ECU details needed to match the right file. Without these you'll end up with a brick:

  • Indica year — V2, Vista, or eCS, and what year
  • Engine — 1.4 TDI or 1.3 Multijet
  • ECU label — hardware number and software number, exactly as printed on the sticker
  • Your tool — KESS, KTAG, MPPS, Autotuner, other? OBD or bench read?

Pull the ECU out, photograph the label, and post the numbers here. Once I have those I can point you at the right modified file for EGR off + DPF off.
 

Post #9

Bro I want to help but my hands are tied without the ECU details — sending a random file will brick your unit, that's not help, that's damage.

It takes two minutes: pull the ECU, photograph the sticker on it, post the hardware number and software number here. Also tell me your tool (KESS, KTAG, MPPS, etc.) and whether you read OBD or bench. Once I have those numbers I can sort you out.
 

Post #10

Can't send a file blind, brother — and the two ECUs you named are not interchangeable. A Delphi file won't run on a Bosch ECU and vice versa, so the "right" answer depends on what's actually bolted to your engine.

What I need to sort you out:

  • Exact Tata model and year — Indica V2 / Vista / eCS, and which year
  • Engine — 1.4 TDI (usually Delphi) or 1.3 Multijet (usually Bosch)
  • ECU label photo or numbers — the HW number and SW number printed on the sticker. This is the one that decides which file fits.
  • Your tool — KESS, KTAG, MPPS, Autotuner, etc. — and OBD or bench read

Once those four are in front of me I can point you at the correct modified file for EGR off + DPF off. Without the HW/SW numbers any file I name is a guess, and a wrong guess bricks the ECU. Pull the unit, read the sticker, post the numbers.
 

Post #11

Good, KTAG on bench is the right setup for mileage correction on this ECU. That's one piece confirmed.

Still need the ECU sticker numbers before I can help further — without HW and SW the file match is a blind guess. Pop the ECU cover, photograph the label, and post the hardware number and software number here. Those two strings are everything.
 
Activity
So far there's no one here