- Joined
- 03.05.2025
- Messages
- 1,407
- Reaction score
- 2,624
A new product by Bin is available: New Holland T8 9.0D ECU File – Bosch EDC17CV41, Software 511206 (AdBlue OFF) 511206 - Stage 1 calibration for New Holland T8 9.0D — AdBlue OFF solution on EDC17CV41 platform
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer.
Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website.
Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition.
The seller takes no responsibility for misuse or non-compliant road use.
Read more about this product...
New Holland T8 9.0D ECU File – Bosch EDC17CV41, Software 511206 (AdBlue OFF) 511206
Description
| Parameter | Value |
|---|---|
| Producer: | New Holland |
| Series: | T8 |
| Model: | 9.0D |
| Model Year: | 2022 |
| Type (Engine): | Turbo-Diesel |
| Output: | 380.0PS / 279.5kW |
| Gear: | Automatic transmission |
| Producer (ECU): | Bosch |
| Build (ECU): | EDC17CV41 |
| Software: | 511206 |
| Checksum: | N/A |
| Eprom 8-Bit sum: | 5050 |
| Nested Versions: | 1 modified version included (Adblue OFF) + Original for reference |
| Project Type: | Complete Binary File |
| Project Size: | 4 194 304 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer.
Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website.
Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition.
The seller takes no responsibility for misuse or non-compliant road use.
Extended Product Information
- Stage 1 ECU file for New Holland T8 9.0D with Bosch EDC17CV41
- Selective Catalytic Reduction (SCR / AdBlue) dosing fully disabled
- All associated diagnostic trouble codes (NOx sensors, tank heater, level sensors) removed
- No derates or limp mode related to SCR system failure
- Factory performance and drivability remain intact
- Binary format ready for direct flashing with supported bench tools
- Validated in agricultural environments — increased uptime during seasonal work
- Compatible with tools supporting EDC17CV41 tractors (e.g., KESS, CMDFlash, etc.)
Read more about this product...
