- Joined
- 03.05.2025
- Messages
- 1,786
- Reaction score
- 21,918
New Tuning File Available: Renault Megane 3 RS 2.0 Turbo ECU Binary File – RD9A2C5000000 / 5249R (EMS3130) 10288906AA - Stage 2 remap for Megane 3 RS 275hp with EMS3130 — boost, fuel and ignition logic fully recalibrated
Welcome to the official discussion thread for the Renault 2.0 Turbo tuning package. This calibration is specifically developed for the EMS3130 ECU and optimized to work seamlessly with the 6M.
Target Performance: 275.0PS / 202.3KW.
Share your experience!
Have you flashed this file? Drop your dyno graphs, 0-100 times, reviews, or ask any technical questions below!
➜ Download Tuning File / View Full Specs
Discussion & Reviews: Renault 2.0 Turbo
Welcome to the official discussion thread for the Renault 2.0 Turbo tuning package. This calibration is specifically developed for the EMS3130 ECU and optimized to work seamlessly with the 6M.
Target Performance: 275.0PS / 202.3KW.
Share your experience!Have you flashed this file? Drop your dyno graphs, 0-100 times, reviews, or ask any technical questions below!
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Extended Product Information
- Stage 2 ECU file for Renault Megane 3 RS 275hp with EMS3130 controller
- Boost targets and turbo control logic adjusted for earlier spool and stability
- Ignition timing refined for higher load and improved combustion efficiency
- Airload, torque and fuel axis remapped to support sport intake/exhaust
- Throttle and pedal maps modified for immediate response under acceleration
- No DTCs or emissions-related functions disabled — diagnostics active
- Checksum: N/A — flashing tool must handle CS validation
- Delivered as complete binary (Original + Stage 2)
- Read via CMD Flash interface — compatible with bench/OBD tools
- Optimized for track use or modified street setups
➜ Download Tuning File / View Full Specs
