Post #1
Online now
- Joined
- 07.09.2026
- Messages
- 20
- Reactions
- 4
- Location
- Türkiye
# Lucas 5AS BIN Data Extractor PRO
This application is a professional desktop tool designed to analyze
Instead of dealing with complex hex data, it decodes the critical security and key codes you need in seconds and presents them in a user-friendly interface.
##
Key Features
The application automatically analyzes the loaded BIN file and instantly displays the following data on the screen:
##
How to Use?
1. Launch the Application:
When you run the application, you will be greeted with a clean and intuitive user interface.
2. Load a File:
Click the "Select BIN file" button on the screen. Select the
3. View the Results:
As soon as the file is loaded, the application parses the data and lists it in the "EXTRACTED DATA" section at the bottom.
4. Use the Data:
* Press the "Copy" button next to any code to copy it individually.
* Use the "Copy all results" button at the bottom to copy all codes as a list to your clipboard.
* To load a new file, you can directly select a new one or reset the screen using the "Clear fields" button.
##
Troubleshooting
## 🛠 Technical Note
This software does not send any of your data to the internet; all analysis and data extraction (offset readings) are performed completely locally (offline) on your computer. Your customers' and vehicles' security information remains 100% safe.
```eof
This application is a professional desktop tool designed to analyze
.bin memory (EEPROM) dumps of Lucas 5AS immobilizer modules, commonly used in Rover, Land Rover, and MG vehicles.Instead of dealing with complex hex data, it decodes the critical security and key codes you need in seconds and presents them in a user-friendly interface.
##
Key FeaturesThe application automatically analyzes the loaded BIN file and instantly displays the following data on the screen:
- IMMO Code: Immobilizer security/pairing data.
- EKA Code (Emergency Key Access): The manual access code required to start the vehicle in an emergency if the remote fob fails.
- Production Date: The manufacturing information of the module.
- FOB Key Data (1, 2, 3, and 4): Identifier data for up to 4 remote controls (FOBs) currently programmed to the vehicle.
- Multi-Language Support: Supports English, Turkish, German, French, and Russian (The application remembers your language preference).
- Quick Copy: You can copy the found codes with a single click or copy the entire list to your clipboard as a quick report.
##
How to Use?1. Launch the Application:
When you run the application, you will be greeted with a clean and intuitive user interface.
2. Load a File:
Click the "Select BIN file" button on the screen. Select the
.bin file you have read from the Lucas 5AS module using your programmer device (e.g., UPA, Xprog, Orange5) from your computer.3. View the Results:
As soon as the file is loaded, the application parses the data and lists it in the "EXTRACTED DATA" section at the bottom.
4. Use the Data:
* Press the "Copy" button next to any code to copy it individually.
* Use the "Copy all results" button at the bottom to copy all codes as a list to your clipboard.
* To load a new file, you can directly select a new one or reset the screen using the "Clear fields" button.
##
Troubleshooting- "File too small" Error: The file you selected may not be a standard Lucas 5AS read (usually a Motorola MCU read) or may have been partially read. The application requires the file to be at least 210 bytes (0xD2) in size to correctly read the required fields. Check your reading process and device.
- "Could not read file" Error: The selected file may be corrupted or inaccessible by the application. Make sure the file is not currently open or being used by another program.
## 🛠 Technical Note
This software does not send any of your data to the internet; all analysis and data extraction (offset readings) are performed completely locally (offline) on your computer. Your customers' and vehicles' security information remains 100% safe.
```eof
