- Joined
- 03.05.2025
- Messages
- 1,408
- Reaction score
- 2,670
A new product by Bin is available: VW Crafter 2.0 TDI CR DAUA ECU Tuning File – AFA8TCABBHS04_T804 / SW 6116 (DCM6.2) 6116 - Stage 1 file for VW Crafter DAUA with 04L906056NB & Delphi DCM6.2 (AFA8TCABBHS04_T804)
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Read more about this product...
VW Crafter 2.0 TDI CR DAUA ECU Tuning File – AFA8TCABBHS04_T804 / SW 6116 (DCM6.2) 6116
Description
| Parameter | Value |
|---|---|
| Producer: | VW |
| Series: | Crafter |
| Model: | 2.0 TDI CR |
| Model Year: | 2018 |
| Name Engine: | DAUA |
| Type (Engine): | Turbo-Diesel |
| Displacement: | 2.0 |
| Output: | 140.0PS / 103.0kW |
| Gear: | 6M |
| Producer (ECU): | Delphi |
| Build (ECU): | DCM6.2 |
| ECU-Nr. Prod: | 04L906056NB |
| Software: | AFA8TCABBHS04_T804 |
| SW-Version: | 6116 |
| Checksum: | N/A |
| Eprom 8-Bit sum: | C826 |
| Nested Versions: | 1 modified version included (Stage 1) + Original for reference |
| Details: | st1 |
| Project Type: | Complete binary file |
| Project Size: | 4 194 304 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Extended Product Information
- Stage 1 ECU file for VW Crafter 2.0 TDI CR DAUA with Delphi DCM6.2
- Boost limiter, injection control and torque model rebalanced
- Throttle request strategies mapped for smoother pedal response
- Airflow modelling tuned for reduced lag and better pull
- No modifications to DPF, EGR or SCR — factory logic preserved
- Suitable for 6M gearbox application with load-focused torque spread
- Original and tuned files included for revertibility
- Flashed via CMD Flash or any DCM6.2-capable tool
Read more about this product...
