- Joined
- 03.05.2025
- Messages
- 1,786
- Reaction score
- 21,949
New Tuning File Available: VW Transporter T6 2.0 TDI CXFA CXHA DCM6.2 ECU File | Software B0A4XTAKBHS0M_X625/SW 3802 | 04L906056KL - Stage 1 remap for VW Transporter T6 2.0 TDI CXFA/CXHA – ECU DCM6.2, SW 3802 / Software B0A4XTAKBHS0M_X625, developed for stronger midrange and reduced lag
Welcome to the official discussion thread for the VW 2.0 TDI CR tuning package. This calibration is specifically developed for the DCM6.2 ECU and optimized to work seamlessly with the 6M.
Target Performance: 150.0PS / 110.3kW.
Share your experience!
Have you flashed this file? Drop your dyno graphs, 0-100 times, reviews, or ask any technical questions below!
âžś Download Tuning File / View Full Specs
Discussion & Reviews: VW 2.0 TDI CR
Welcome to the official discussion thread for the VW 2.0 TDI CR tuning package. This calibration is specifically developed for the DCM6.2 ECU and optimized to work seamlessly with the 6M.
Target Performance: 150.0PS / 110.3kW.
Share your experience!Have you flashed this file? Drop your dyno graphs, 0-100 times, reviews, or ask any technical questions below!
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Extended Product Information
- Stage 1 performance remap for VW Transporter T6 2.0 TDI CXFA / CXHA
- Optimised turbo spool for better low-end pickup and towing response
- Torque limiter and injection timing refinements for smoother gear transitions
- Air mass and load requests calibrated for better part-throttle efficiency
- Fuel rail pressure adjusted for stability under load
- Developed for Delphi DCM6.2 ECU – Software B0A4XTAKBHS0M_X625
- Supports SW 3802 – CMD Flash compatible
- Delivered as a complete binary with original and Stage 1 version
âžś Download Tuning File / View Full Specs
