Post #1
- Joined
- 03.05.2025
- Messages
- 1,865
- Reaction score
- 49,536
New Tuning File Available: VW Transporter T5 2.0 TDI CFCA EDC17CP20 ECU File | Software 509954/SW 7054 | 03L907309L - Stage 1 & Stage 2 NO DPF for VW Transporter T5 2.0 TDI CFCA – ECU 03L907309L / Prod 03L906022JE with EDC17CP20, refined torque and DPF delete logic
Welcome to the official discussion thread for the VW 2.0 TDI CR tuning package. This calibration is specifically developed for the EDC17_CP20 ECU and optimized to work seamlessly with the DSG.
Target Performance: 180.0PS / 132.4KW.
Share your experience!
Have you flashed this file? Drop your dyno graphs, 0-100 times, reviews, or ask any technical questions below!
➜ Download Tuning File / View Full Specs
Discussion & Reviews: VW 2.0 TDI CR#
Welcome to the official discussion thread for the VW 2.0 TDI CR tuning package. This calibration is specifically developed for the EDC17_CP20 ECU and optimized to work seamlessly with the DSG.
Target Performance: 180.0PS / 132.4KW.
Share your experience!Have you flashed this file? Drop your dyno graphs, 0-100 times, reviews, or ask any technical questions below!
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Extended Product Information#
- Includes Stage 1 and Stage 2 maps for VW Transporter T5 CFCA 2.0 TDI
- DPF system fully disabled in Stage 2 — regeneration & monitors off
- Torque limiter, driver request and boost maps revised for both files
- Injection timing refined for smooth diesel performance
- Supports DSG calibration logic – stock gearbox behaviour preserved
- Air mass and turbo flow control improved for stronger midrange torque
- Siemens EDC17CP20 ECU – Software 509954 / SW 7054
- Compatible with CMD Flash and other EDC17-capable tools
- Full binary set with Original + two modified versions
- Emissions-related components untouched in Stage 1 file
➜ Download Tuning File / View Full Specs
