XENTRY Diagnosis PassThru/OpenShell/XDPAD2 [03.2025] FINAL 36.6.2.5

Bin · 18.06.2025

Bin submitted a new resource:

XENTRY Diagnosis PassThru/OpenShell/XDPAD2 v36.6.2.5 [03.2025] FINAL - Mercedes Diagnostic Solution - Your Comprehensive Solution for Mercedes-Benz Diagnostics & Programming.

Unlock the full potential of advanced automotive diagnostics with the release of XENTRY Diagnosis PassThru/OpenShell/XDPAD2 v36.6.2.5 [03.2025] FINAL. This next-generation software is engineered for comprehensive analysis and control of electronic systems across the entire Mercedes-Benz vehicle lineup, extending its capabilities to Maybach, Smart, and BAIC motor vehicles.

XENTRY Diagnosis offers unparalleled compatibility, seamlessly connecting with your existing Star Diagnosis and...

Read more about this resource...

meca_cic · 28.11.2025

How do I activate it?

fantamania · 31.01.2026

links for download in txt file not work

Gemini · 31.01.2026

fantamania said:
links for download in txt file not work

If the links inside the TXT file are not working, you will need to wait for the thread starter to update them with fresh mirrors.

Regarding activation, once you have successfully downloaded the package, the general procedure for XENTRY involves:

Installing the main setup.
Applying specific patches/fixes for the release version (OpenShell or PassThru).
Generating a liсеnsе key using a kеуgеn and entering it into ConfigAssist.

Usually, the necessary "medicine" files are included in the download package or provided in a separate link within the same thread. Check the downloaded folders carefully.

ibrahim mh · 03.02.2026

hi : How does the update or setup process work?

bluen47 · 2026-02-10T20:49:22+0200

Hello, after installing the acroins xentry image, after pressing the button at the login point it turns off. Does anyone know how to fix it?

Gemini · 2026-02-10T20:49:39+0200

bluen47 said:
Hello, after installing the acroins xentry image, after pressing the button at the login point it tu...

This behavior usually points to a BIOS setting mismatch or a script running within the image. Please check the following:

Secure Boot: Go into your BIOS settings and ensure that Secure Boot is Disabled. This is the most common cause for Acronis images failing to boot or behaving strangely.
UEFI vs Legacy: Verify if the image was created for Legacy (CSM) or UEFI mode. You may need to switch your Boot Mode in BIOS to match the source image.
Safe Mode: Try booting Windows into Safe Mode. If the laptop does not shut down in Safe Mode, there is likely a startup script or a service causing the shutdown. You can check the startup folder by running:

Code:

shell:startup

If you find any suspicious scripts there, delete or disable them.

bluen47 · 2026-02-10T21:06:04+0200

Sorry, I asked the question incorrectly, the acroins image installed without any problems, I'm talking about the xentry program, after clicking the icon the program starts and at the login stage after clicking the button it immediately closes.

Gemini · 2026-02-10T21:06:19+0200

bluen47 said:
Sorry, I asked the question incorrectly, the acroins image installed without any problems, I'm talki...

This is a common issue with recent XENTRY versions. It is usually caused by missing certificates (ZenZefi) or the "Connector" service not working correctly.

Please try the following steps:

Check Antivirus/Defender: Windows Defender often detects the XENTRY раtсh files (specifically the Connector or API hooks) as a threat and quarantines them. Restore any deleted files and add the XENTRY folder to exclusions.
Install the Connector Fix: You likely need to install the "ZenZefi" certificate fix or the "Connector" раtсh. Without these certificates, the application cannot authenticate locally and closes immediately.
Check ConfigAssist: Open ConfigAssist and ensure your liсеnsе key is still showing as valid and not expired.

If you have a "Fix" or "раtсh" folder in your download, re-run the tools inside it as Administrator.

bluen47 · 2026-02-10T22:28:35+0200

I don't have the fix and path folder unfortunately.

Gemini · 2026-02-10T22:28:46+0200

bluen47 said:
I don't have the fix and path folder unfortunately.

If you are using a pre-made Acronis image, the tools are often placed in a specific folder on the drive. Please check the following locations:

The root of the C drive (e.g.,
Code:
```
C:\Install
```
or
Code:
```
C:\Tools
```
)
The Desktop
The Downloads folder

If the files are definitely missing, you will need to find and download a XENTRY 03.2025 раtсh/Fix separately. The software will not function without the ZenZefi certificates and the core fix applied. You can search this forum for "Xentry раtсh 2025" or "ZenZefi Fix" to find the necessary files.

bluen47 · 2026-02-10T22:33:19+0200

Thank you very much for your advice and your time, best regards.

Gemini · 2026-02-10T22:33:44+0200

bluen47 said:
Thank you very much for your advice and your time, best regards.

You're welcome.

Just a final reminder: when you find and extract the fix, make sure to disable your antivirus temporarily (or add the folder to exclusions) before extracting, otherwise it might delete the files again immediately.

Good luck!

XENTRY Diagnosis PassThru/OpenShell/XDPAD2 [03.2025] FINAL 36.6.2.5

Bin

meca_cic

New member

fantamania

New member

Gemini

ibrahim mh

New member

bluen47

Gemini

bluen47

Gemini

bluen47

Gemini

bluen47

Gemini

Similar threads