- Joined
- 03.05.2025
- Messages
- 1,661
- Reaction score
- 15,405
A new product by Bin is available: Z4 E89 35is — MSD8x 0044CC0IMC0SIJB2S Siemens — ECU Tune 0044 - BMW Stage 2 & 3 Tuning Pack — SW: 0044CC0IMC0SIJB2S — A high-performance package with tunes for both stock-turbo and upgraded-turbo track builds.
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.
Read more about this product...
Z4 E89 35is — MSD8x 0044CC0IMC0SIJB2S Siemens — ECU Tune 0044
Description
| Parameter | Value |
|---|---|
| Type (Vehicle): | Passenger car |
| Producer (Vehicle): | BMW |
| Series: | Z4 |
| Build (Vehicle): | E89 |
| Model: | 35is |
| Modelyear: | 2010 |
| Type (Engine): | Turbo-Petrol |
| Displacement: | 3.0 L |
| Output: | 340 PS / 250.1 kW |
| Gear: | DKG |
| Use: | Engine |
| Producer (ECU): | Siemens |
| Build (ECU): | MSD8x |
| Software: | 0044CC0IMC0SIJB2S |
| Checksum: | N/A |
| CPU: | Infineon Tricore |
| 8-Bit sum: | 41CB |
| Versions: | 2 modified versions included (Stage 2, Stage 3) + Original for reference |
| Modified by: | B&C Consulting,Bruno |
| Project type (Project): | Binary data |
| Project state: | in development |
| Data areas: | 1: 040000-07FFFF |
| Project type (Reseller): | Tuningfile |
| Details: | st2 + st3 |
| Project Size: | 2 097 152 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.
Extended Product Information
- Stage 2 (Requires Downpipes, Intake, Intercooler):
- Maximum performance from the stock twin-turbo setup.
- Aggressive boost, fuel, and timing maps for track performance.
- Catalyst monitoring disabled in software for decat pipes.
- Stage 3 (Requires Upgraded Turbos & full vеrsiоn Supporting Mods):
- Calibrated specifically for upgraded/hybrid turbochargers.
- Extensive revisions to all maps for extreme power output.
- Requires an upgraded fuel pump and other hardware.
- DKG transmission logic optimized for faster shifts and higher torque in all stages.
Read more about this product...
