bmw

New release thread for BMW ISTA Support Utility for Configuration and Service Setup: discuss, share feedback, and get help. https://binunlock.com/resources/bmw-ista-support-utility-for-configuration-and-service-setup.580/ BMW ISTA Support Utility for Configuration and Service Setup v1.1 —...

This resource is a BMW ISTA workstation support utility intended for service environments where BMW ISTA (Integrated Services Technical Application) is installed and used under valid licensing. BMW ISTA is the OEM service suite for diagnostics, guided test plans, repair instructions, and...

New release thread for TestO ECU Job Runner and Data Logger for BMW Engine Control Units: discuss, share feedback, and get help. https://binunlock.com/resources/testo-ecu-job-runner-and-data-logger-for-bmw-engine-control-units.569/ TestO ECU Job Runner and Data Logger for BMW Engine Control...

TestO is a lightweight workshop utility for running predefined ECU jobs and recording live measurement values from supported BMW engine control units. It combines an ECU and job selector with a configurable data logger, making it useful for diagnostics verification, driveability checks, and...

New release thread for BMW VIN Check Digit Calculator for 17-Character VIN Validation: discuss, share feedback, and get help. https://binunlock.com/resources/bmw-vin-check-digit-calculator-for-17-character-vin-validation.568/ BMW VIN Check Digit Calculator for 17-Character VIN Validation 2017...

VIN_CheckDigit is a lightweight BMW Group helper that calculates the VIN check digit and checksum for 17-character VINs. It is used to validate VIN integrity in service workflows, paperwork checks, and data entry verification. The tool outputs the computed check digit so you can confirm whether...

New release thread for BMW ZCS SA FA Decoder and Option Code Generator Toolkit: discuss, share feedback, and get help. https://binunlock.com/resources/bmw-zcs-sa-fa-decoder-and-option-code-generator-toolkit.519/ BMW ZCS SA FA Decoder and Option Code Generator Toolkit ZEKO 4.2a – Decode GM SA...

This toolkit is built for BMW vehicle order and coding data workflows on platforms that use ZCS or FA style equipment coding. It helps you interpret the GM, SA, and VN strings and work with SA option content offline, which is useful when preparing retrofit coding, replacing modules, or...

New release thread for BMW E6x MSS65 Binary Editor for M5 and M6 Calibration Files: discuss, share feedback, and get help. https://binunlock.com/resources/bmw-e6x-mss65-binary-editor-for-m5-and-m6-calibration-files.516/ BMW E6x MSS65 Binary Editor for M5 and M6 Calibration Files v1.4 – Load...

MSS65 Binary Modification Tool is a Windows desktop utility built for file based calibration changes on the BMW MSS65 DME used with the S85 V10 platform. It is intended for working with saved binary files that were previously read from the ECU, then writing an updated file after parameter...

New release thread for K+DCAN Utility for BMW Cable CAN Mode Switching: discuss, share feedback, and get help. https://binunlock.com/resources/k-dcan-utility-for-bmw-cable-can-mode-switching.486/ K+DCAN Utility for BMW Cable CAN Mode Switching 2.0 CAN mode switch for BMW K+DCAN cables, COM...

K+DCAN Utility is a small service tool designed to configure BMW K+DCAN USB interfaces before you run diagnostics or coding. It helps you switch the adapter CAN mode and baud rate, confirm the correct COM port, and improve connection stability when working with BMW tools that rely on an OBD USB...

New release thread for BMW ISTA Configuration Utility for Windows Diagnostic Workstations: discuss, share feedback, and get help. https://binunlock.com/resources/bmw-ista-configuration-utility-for-windows-diagnostic-workstations.484/ BMW ISTA Configuration Utility for Windows Diagnostic...

BMW ISTA is BMW Group’s workshop system that contains service data and technical information used during vehicle diagnostics. It is commonly referenced alongside: ISTA-D for diagnostics ISTA-P for programming ISTA+ as the newer combined direction for diagnostics and programming depending on...

New release thread for BMW HU Engineering Tool for CIC NBT EVO: discuss, share feedback, and get help. https://binunlock.com/resources/bmw-hu-engineering-tool-for-cic-nbt-evo.472/ BMW HU Engineering Tool for CIC NBT EVO v2.6.PRE – manage BMW CIC NBT EVO FSC and SWT data for retrofits and...

BMW HU Tool v2.6.PRE is a workshop utility for working with BMW CIC, NBT and EVO head units on E, F and G series vehicles. It focuses on managing FSC and SWT data, preparing USB based update projects and running engineering level checks during retrofits, repairs and configuration work...

New release thread for BMW ZGW and NBT MGU SSH Port Forwarding Utility: discuss, share feedback, and get help. https://binunlock.com/resources/bmw-zgw-and-nbt-mgu-ssh-port-forwarding-utility.470/ BMW ZGW and NBT MGU SSH Port Forwarding Utility 1.0 – one click ZGW and NBT/MGU SSH port...

This small utility is designed for BMW Ethernet based diagnostic and coding setups where you need to forward ZGW and NBT or MGU SSH IPs quickly. When the tool runs it closes any other TCP or UDP connections on ports 6811, 6801 and 22 and then sets up a clean forwarding tunnel for your current...

New release thread for EDIABAS RPLUS ICOM Configuration How-To Guide: discuss, share feedback, and get help. https://binunlock.com/resources/ediabas-rplus-icom-configuration-how-to-guide.469/ EDIABAS RPLUS ICOM Configuration How-To Guide EDIABAS 7.6.0 – step by step RPLUS setup for stable BMW...

This resource is a pure how-to guide that explains how to configure a second standalone EDIABAS installation to use RPLUS mode with a BMW ICOM interface. There are no downloads in this resource: all steps are performed with existing EDIABAS files and two configuration screenshots that you insert...