- Joined
- May 3, 2025
- Messages
- 459
- Reaction score
- 2
A new product by Bin is available: Audi Q7 3.0 V6 TDI CR ECU Firmware – 4L0910401K / 383723 / SW 0030 (EDC16 with NO DPF Option) 4L0907401 - Dual-stage remap (Stage 1 & Stage 2 NO DPF) for Audi Q7 3.0 TDI with Bosch EDC16 – improved response and emissions-off compatibility.
Read more about this product...
Audi Q7 3.0 V6 TDI CR ECU Firmware – 4L0910401K / 383723 / SW 0030 (EDC16 with NO DPF Option) 4L0907401
Description
| Parameter | Value |
|---|---|
| Producer: | Audi |
| Series: | Q7 |
| Model: | 3.0 V6 TDI CR |
| Model Year: | 2007 |
| Type (Engine): | Turbo-Diesel |
| Displacement: | 3.0 |
| Gear: | S-Tronic 6 |
| Producer (ECU): | Bosch |
| Build (ECU): | EDC16 |
| ECU-Nr. Prod: | 4L0910401K |
| ECU-Nr. ECU: | 4L0907401 |
| Software: | 383723 |
| SW-Version: | 0030 |
| Checksum: | No CS |
| Eprom 8-Bit sum: | 75C7 |
| Nested Versions: | 2 modified versions included (Stage 1, Stage 2 NO DPF) + Original for reference |
| Project Size: | 2 097 152 bytes |
| Read Hardware: | CMD Flash |
Extended Product Information
- Stage 1 remap for stock DPF configuration — increased torque and smoother boost response
- Stage 2 calibration disables DPF routines for off-road/track use
- Boost control and torque limiters optimized for improved drivability
- Fuel quantity and injection timing maps refined for better efficiency
- EGR parameters untouched for emissions compliance (Stage 1)
- Compatible with Bosch EDC16 ECU SW 0030 / ECU ID 383723
- No checksum correction applied — validate with WinOLS or equivalent
- CMD Flash read/write tested
- Includes both Stage 1 and Stage 2 NO DPF versions + original backup
Read more about this product...