- Joined
- May 3, 2025
- Messages
- 882
- Reaction score
- 10
A new product by Bin is available: S3 8V | DQ250 MQB 4932 Temic | DSG Tune File TCMDQ250021 - Audi Stage 3 TCU Pack | Prod: 0D9300012L | An extreme DSG tune for big-turbo cars with 14-bar clamping pressure and adjustable launch control RPM.
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.
Read more about this product...
S3 8V | DQ250 MQB 4932 Temic | DSG Tune File TCMDQ250021
Description
| Parameter | Value |
|---|---|
| Type (Vehicle): | Passenger car |
| Producer: | Audi |
| Series: | S3 |
| Build: | 8V |
| Model: | 2.0 TFSI 300hp |
| Modelyear: | 2016 |
| Type (Engine): | Turbo-Petrol |
| Displacement: | 2.0 L |
| Output: | 300 PS / 220.6 kW |
| Gear: | DSG |
| Use: | Gearbox |
| Producer (TCU): | Temic |
| Build (TCU): | DQ250-6A MQB |
| ECU-Nr. Prod.: | 0D9300012L |
| Software: | EV_TCMDQ250021 |
| SW-Version: | 4932 |
| Checksum: | N/A |
| 8-Bit sum: | 0000 |
| Versions: | 2 modified versions (Stage 3 Rev 14 bar, Stage 3 Rev 14 bar LC5k 7k5 RPM) + Original |
| Calibrated by: | HP,info |
| Project type (Project): | Partial (partially coded) |
| Project type (Reseller): | Tuningfile |
| Details: | Stage 3 Gearbox |
| Project Size: | 1 376 272 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.
Extended Product Information
- Stage 3 calibration for highly modified, big-turbo engine setups.
- Increased clutch clamping pressure to 14 bar to handle extreme torque.
- Optional version with custom Launch Control set to 5000 RPM.
- Optional version with raised rev limiter to 7500 RPM.
- Aggressive, lightning-fast shift speeds for maximum acceleration.
- True Manual Mode with no forced upshifts at the rev limiter.
Read more about this product...