- Joined
- May 3, 2025
- Messages
- 847
- Reaction score
- 3
A new product by Bin is available: BMW 123D E87 2.0 Turbo-Diesel ECU Calibration File – 396563 (EDC17CP02) O_71MPID571A - Stage 2 calibration for BMW 123D E87 with DPF-off and boost/timing refinement
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Read more about this product...
BMW 123D E87 2.0 Turbo-Diesel ECU Calibration File – 396563 (EDC17CP02) O_71MPID571A
Description
Parameter | Value |
---|---|
Producer: | BMW |
Series: | E81/E87 |
Model: | 123D |
Model Year: | 2009 |
Type (Engine): | Turbo-Diesel |
Displacement: | 2.0 |
Gear: | 6M |
Producer (ECU): | Bosch |
Build (ECU): | EDC17_CP02 |
ECU-Nr. Prod: | O_71MPID571A |
ECU-Nr. ECU: | 0281013776 |
Software: | 396563 |
Checksum: | N/A |
Eprom 8-Bit sum: | 49BF |
Nested Versions: | 2 modified versions included (Stage 1, Stage 2 NO DPF) + Original for reference |
Details: | st1 + st2 NO DPF |
Project Type: | Complete binary file |
Project Size: | 2 097 152 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Extended Product Information
- Stage 2 calibration for BMW 123D with Bosch EDC17CP02 ECU
- DPF system fully disabled — regeneration routines and monitoring logic removed
- Torque limiters and smoke maps optimised for improved low-end pull
- Boost control and injection timing calibrated for faster turbo response
- No interference with factory immobilizer, VIN or CVN parameters
- Cold-start and throttle smoothing maintained for OEM-level drivability
- All versions included — Original, Stage 1, Stage 2 NO DPF
- Compatible with bench and boot-mode flashing tools
- Motorsport/off-road use only — not for public roads
Read more about this product...