- Joined
- May 3, 2025
- Messages
- 882
- Reaction score
- 10
A new product by Bin is available: BMW 530i G30 B48 ECU File – MG1CS003 R0C9J8D2B / R0C9J8D2BAEEX0 (CAT Delete, Sport Display) R0C9J8D2B - BMW G30 530i B48 — Stage 1 CAT delete, Vmax limiter removed, Sport Display enabled.
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer.
Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website.
Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition.
The seller takes no responsibility for misuse or non-compliant road use.
Read more about this product...
BMW 530i G30 B48 ECU File – MG1CS003 R0C9J8D2B / R0C9J8D2BAEEX0 (CAT Delete, Sport Display) R0C9J8D2B
Description
Parameter | Value |
---|---|
Producer: | BMW |
Series: | G30 |
Model: | 530i |
Model Year: | 2017 |
Name Engine: | B48 |
Displacement: | 2.0 |
Output: | 252.0PS / 185.3kW |
Gear: | Automatic |
Producer (ECU): | Bosch |
Build (ECU): | MG1CS003 |
Software: | R0C9J8D2B |
SW-Version: | R0C9J8D2BAEEX0 |
Checksum: | N/A |
Eprom 8-Bit sum: | 1DC5 |
Nested Versions: | 1 modified version included (ST1 + CAT OFF + VMAX + SPORT DISPLAY) + Original for reference |
Project Type: | Complete binary file |
Read Hardware: | — |
Project Size: | 8 388 608 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer.
Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website.
Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition.
The seller takes no responsibility for misuse or non-compliant road use.
Extended Product Information
- Optimized ECU firmware for BMW 530i G30 with 2.0L B48 engine
- CAT monitoring diagnostics disabled for decat exhausts
- Vmax limiter completely removed — no speed threshold
- Sport Display activated for digital performance metrics
- Improved low-end throttle and mid-range torque curve
- Original ECU file included for safe rollback
- Tested with MG1CS003-based boot read tools
- For track/off-road use only — not road certified
Read more about this product...