- Joined
- May 3, 2025
- Messages
- 847
- Reaction score
- 3
A new product by Bin is available: Fiesta 1.6T — MED17 Bosch 12A650 | 539039 Stage 3 Hybrid Turbo C1BY - Ford Stage 3 — Prod: C1BY-12A650-AD — An extreme performance tune for the Fiesta ST, calibrated for a hybrid turbo and full supporting hardware.
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.
Read more about this product...
Fiesta 1.6T — MED17 Bosch 12A650 | 539039 Stage 3 Hybrid Turbo C1BY
Description
| Parameter | Value |
|---|---|
| Type (Vehicle): | Passenger car |
| Producer (Vehicle): | Ford |
| Series: | Fiesta |
| Model: | 1.6T |
| Modelyear: | 2014 |
| Type (Engine): | Turbo-Petrol |
| Displacement: | 1.6 L |
| Output: | 182 PS / 133.9 kW |
| Gear: | 6-Speed Manual |
| Use: | Engine |
| Producer (ECU): | Bosch |
| Build (ECU): | MED17.2.2 |
| ECU-Nr. Prod.: | C1BY-12A650-AD |
| ECU-Nr. ECU: | C1BY-12A650-DA |
| Software: | 539039 |
| SW-Version: | C1BY-14C204-DA |
| Checksum: | N/A |
| Cpu: | Bosch MED17 |
| 8-Bit sum: | 5EE6 |
| Versions: | 1 modified version included (Stage 3) + Original for reference |
| Modified by: | Heinz |
| Project type (Project): | Partiell (Nur Kennfeldbereich) |
| Read Hardware: | CMD Flash |
| Project type (Reseller): | Tuningfile |
| Details: | hybrid turbo ( 274hp & 356nm) |
| Project Size: | 2 097 152 bytes |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. These files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without first confirming mechanical condition. The seller accepts no responsibility for misuse or non-compliant road use.
Extended Product Information
- Calibrated specifically for an upgraded hybrid turbocharger
- Targets an aggressive ~274hp and 356Nm of torque
- Extensive revisions to all boost, fuel, and timing maps for maximum power
- Requires a full exhaust system, upgraded intercooler, and intake
- Catalyst monitoring disabled in software for decat pipes (for off-road use)
- All engine safety systems retained and recalibrated for extreme performance
Read more about this product...