- Joined
- May 3, 2025
- Messages
- 847
- Reaction score
- 3
A new product by Bin is available: Mercedes-Benz Sprinter CDI ECU File – 398897 / EDC16CP31 (DPF EGR Swirl OFF, OM642) CR40 - Mercedes-Benz Sprinter CDI ECU File – 398897 / EDC16CP31 (DPF EGR Swirl OFF, OM642)
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer.
Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website.
Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition.
The seller takes no responsibility for misuse or non-compliant road use.
Read more about this product...
Mercedes-Benz Sprinter CDI ECU File – 398897 / EDC16CP31 (DPF EGR Swirl OFF, OM642) CR40
Description
| Parameter | Value |
|---|---|
| Producer: | MB |
| Series: | Sprinter |
| Model: | 218/318/518 CDI 184hp |
| Model Year: | 2000 - 2010 |
| Name Engine: | OM 642 |
| Type (Engine): | Turbo-Diesel |
| Displacement: | 3.0 |
| Output: | 154.0PS / 113.3kW |
| Gear: | Automatic |
| Producer (ECU): | Bosch |
| Build (ECU): | EDC16CP31 |
| ECU-Nr. Prod: | CR40-64x-46N0-906-115kW-N7-0ANF-01-IAS-003_ME5 |
| Software: | 398897 |
| Checksum: | N/A |
| Eprom 8-Bit sum: | FA0C |
| Nested Versions: | 3 modified versions included (DPF OFF, Stage 1 + DPF EGR Swirl OFF, Stage 1 v2 + DPF EGR Swirl OFF) + Original for reference |
| Project Type: | Complete binary file |
| Project Size: | 524 288 bytes |
| Read Hardware: | NEW GENIUS |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer.
Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website.
Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition.
The seller takes no responsibility for misuse or non-compliant road use.
Extended Product Information
- Custom Stage 1 remap for Mercedes-Benz Sprinter 3.0 CDI with Bosch EDC16CP31 ECU
- DPF (diesel particulate filter) system fully deactivated — no regeneration or DTCs
- EGR valve logic removed and flow mapped to zero, diagnostics suppressed
- Swirl flap operation and feedback loops fully disabled
- Injection timing and torque limiter maps optimized for stronger low-end delivery
- Improved fuel economy under load and better drivability with automatic gearbox
- All fault codes and limp mode triggers related to emissions system removed
- Flashable via NEW GENIUS interface or compatible tool
Read more about this product...