- Joined
- May 3, 2025
- Messages
- 528
- Reaction score
- 2
A new product by Bin is available: VW Passat 2.0 TDI CUAA EDC17CP74 ECU File | Software 003215/SW 1754 | 03N907309 - Stage 1 remap for VW Passat CUAA 2.0 TDI with Bosch EDC17CP74 – ECU 03N907309 / Prod 03N906026E, focused on torque gains and better DSG response
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Read more about this product...
VW Passat 2.0 TDI CUAA EDC17CP74 ECU File | Software 003215/SW 1754 | 03N907309
Description
| Parameter | Value |
|---|---|
| Producer: | VW |
| Series: | Passat |
| Model: | 2.0 TDI CR |
| Model Year: | 2015 |
| Name Engine: | CUAA |
| Type (Engine): | Turbo-Diesel |
| Displacement: | 2.0 |
| Output: | 240.0PS / 176.5kW |
| Gear: | DSG7 |
| Producer (ECU): | Bosch |
| Build (ECU): | EDC17CP74 |
| ECU-Nr. Prod: | 03N906026E |
| ECU-Nr. ECU: | 03N907309 |
| Software: | 003215 |
| SW-Version: | 1754 |
| Checksum: | N/A |
| Eprom 8-Bit sum: | 0000 |
| Nested Versions: | 1 modified version included (Stage 1) + Original for reference |
| Project Type: | Complete binary file |
| Project Size: | 4 358 144 bytes |
| Details: | st1 |
All tuning files were acquired through official EVC.de resellers and verified on a professional dynamometer. Each calibration corresponds to the developer listed in the “Modified By” section — performance graphs may be available on their official website. Please note: these files are intended for motorsport or off-road use only. Ensure proper installation and do not operate the vehicle aggressively without verifying mechanical condition. The seller takes no responsibility for misuse or non-compliant road use.
Extended Product Information
- Stage 1 calibration for VW Passat 2.0 TDI CUAA (DSG7)
- Boost target and MAP sensor logic adjusted for torque focus
- Injection timing and rail pressure maps improved for combustion efficiency
- Driver torque request and pedal maps refined for better pickup
- Torque limiters raised across load/rpm matrix
- Turbo and air mass flow control enhanced for better midrange response
- No DPF/EGR/SCR deletes — emission control left stock
- Compatible with Bosch EDC17CP74 – ECU 03N907309
- Flash-ready via CMD Flash tools
- Delivered with both original and tuned binaries
Read more about this product...